Joomla says you aren't logged in
release_notes:1.1.0
Table of Contents
Version 1.1.0
Version 1.1.0 has been released on 2012-09-15.
Note that this version does not include a 'library' dfu.
Installation
To install when current firmware is Devention:
- Download the firmware dfu for your transmitter and the 'filesystem' zip file
- Unzip the 'filesystem' zip file
- Install firmware dfu for your transmitter
- Restart transmitter.
- Windows should ask to format the drive. press 'Ok' to format
- open the new 'Removable Drive' in Windows explorer
- copy the contents of the 'filesystem' directory to the 'Removable drive'. Do NOT copy the directory itself!. The 'Removable Drive' should have the following in its root directory:
- tx.ini
- models
- language
- media
- template
- modelico
- restart transmitter
To upgrade from a previous Deviation install:
- Download the firmware dfu for your transmitter and the 'filesystem' zip file
- Unzip the 'filesystem' zip file
- Install firmware dfu for your transmitter
- Restart transmitter holding down 'Ent' to enter USB mode
- Open the new 'Removable Drive' in Windows explorer
- copy the contents of the 'filesystem' directory to the 'Removable drive', but do NOT copy the 'models' directory. If you do, you'll lose all of your saved models! Also NOT copy the 'filesystem' directory itself!. The 'Removable Drive' should have the following in its root directory:
- tx.ini
- models
- language
- media
- template
- modelico
- restart transmitter
NOTE: If you reboot and the screen is blank, you lilkely didn't install the filesystem properly. restart the Tx while holding 'ENT', and check the 'Removable Drive' Contents
New Features
- Support for DEVO 6/6S transmitters
- Support for Russian language
- Add PPM output
- Timer can now be reset by long 'EXT' on main-page
- Timer will now beep as it approaches 0 in countdown mode
Bug Fixes
- Fixes DSM2 binding issues
- J6Pro ID bug-fix (must rebind all Nine-Eagles models)
- Emulator will ask to save if you force-close
- Support up-to 12 channels for Devo protocol
- Max number of channels is defined by the protocol
- The binding message will no longer show on the Scanner page
- USB can be enabled from the USB page
- The current 'toggle' icon is highlighted, and the menu can be cancelled without selection
- MODE3 and MODE4 were swapped
- Number of mixers on the complex page is now maxed at 10
release_notes/1.1.0.txt (60012 views) · Last modified: 2016/04/27 06:22 by PhracturedBlue