×

Notice

The forum is in read only mode.
  1. Forum
  3. General
  5. General Discussions
  7. Deviation 5.0 has been released

Deviation 5.0 has been released

More
30 Apr 2016 20:46 - 30 Apr 2016 21:07 #47515 by PhracturedBlue
Deviation 5.0 has been released was created by PhracturedBlue
I have released Deviation 5.0 after over 2 years of work by many different contributors. While it will look and feel very much like 4.0.1, there have been a huge number of changes across the board.

Note that while a lot of development has happened for the Devo F12e, F7, F4 and X9d, none of these were complete enough to be included in the 5.0.0 release. If you have an F12e, F7, or F4, you are welcome to try the nightly builds which do support these transmitters, although there are still many known issues (mostly related to the display)

Thanks everyone who has helped to get us to where we are now.

Contributors to this release include:
djtrance
goebish
GyrFalcon
mwm
hexfet
Indigo
kerzin
Moeder
PhracturedBlue
richardclli
rivig
slipstream
Thomas.Heiss
Treadmule
victzh
vlad_vy

I'm sorry if you contributed and weren't included. there were a couple names I couldn't easily match to forum user Ids. Just let me know, and I'll give you due credit
Last edit: 30 Apr 2016 21:07 by PhracturedBlue.
More
30 Apr 2016 21:00 #47516 by HappyHarry
Replied by HappyHarry on topic Deviation 5.0 has been released
nice one, many thanks to all involved in the project!
More
30 Apr 2016 21:11 #47517 by -=Hubi-Dirk=-
Replied by -=Hubi-Dirk=- on topic Deviation 5.0 has been released
Thanks to all for these fantastic work over several years.
More
01 May 2016 02:29 #47525 by slo_rider
Replied by slo_rider on topic Deviation 5.0 has been released
Wow! Thank you so much for all the work that you put into this. It's people like you that make this such a great community :)
More
01 May 2016 03:24 #47526 by Deal57
Replied by Deal57 on topic Deviation 5.0 has been released
Compliments to all for this milestone effort, and many thanks for sharing your innovation, skills and drive with this community.
Deviation Devo7e 3way switch mod, A7105, NRF24L01
Devo6s 2x2 switch mod, trim mod, haptic, multimodule, A7105, NRF24L01, CC2500
Devo12e 4-in-1 with voice mod -- it speaks!!
More
01 May 2016 03:36 #47527 by magic_marty
Replied by magic_marty on topic Deviation 5.0 has been released
A big thank you to all contributors and for sharing this incredible firmware, I have been a user since day one and couldn't imagine using my tx without Deviation...


Quick question...does 5.0 include the voice alerts build?
More
01 May 2016 06:02 #47531 by mtx63
Replied by mtx63 on topic Deviation 5.0 has been released
A dream comes true. Very good performance. Thank you to all.

Dieter
More
01 May 2016 08:56 #47533 by TheSFReader
Replied by TheSFReader on topic Deviation 5.0 has been released
Greatly done ! Thanks all of you !!! (especially PB for coming back ;D, and mwm for triggering it )
More
01 May 2016 09:05 #47535 by SirDomsen
Replied by SirDomsen on topic Deviation 5.0 has been released
+1
More
01 May 2016 09:11 #47536 by Sero
Replied by Sero on topic Deviation 5.0 has been released
I already installed it on my two 6s and as soon as the weather plays along (I'm about to grow gills :blink: ), I will give it a thorough test.
A day without flying can't be called a day.
More
01 May 2016 10:03 #47537 by SeByDocKy
Replied by SeByDocKy on topic Deviation 5.0 has been released
+10 000 Thunbs up :)
More
01 May 2016 15:46 - 01 May 2016 16:28 #47551 by mwm
Replied by mwm on topic Deviation 5.0 has been released
No, 5.0 does not include the voice alerts code. That isn't ready. I've just ordered some of the speakers recommended for the Taranis, and now that 5.0 is out, should be able to get back to work on it. Not clear where I'll start, thought.
Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.
Last edit: 01 May 2016 16:28 by mwm.
More
01 May 2016 16:00 #47553 by mwm
Replied by mwm on topic Deviation 5.0 has been released
Now that 5.0 is out, I'd like to address the issue of a second automated build. New protocols get added fast enough that people move to the nightly build to get them, when the probably ought to still be using the release build. So automated builds from a branch with nothing but new protocols and possibly bug fixes would seem to benefit them.

Discussion at www.deviationtx.com/forum/7-development/...tomated-build-branch , please.
Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.
More
02 May 2016 21:08 - 02 May 2016 21:08 #47604 by MacGyverek
Replied by MacGyverek on topic Deviation 5.0 has been released
I am using now 4.01 version. What about model.ini compatybility?? There is any changes?? I saw something about bug with swap AIL, ELE channels.
Last edit: 02 May 2016 21:08 by MacGyverek.
More
03 May 2016 07:31 #47631 by Richard96816
Replied by Richard96816 on topic Deviation 5.0 has been released
Congrats on the release. Wonderful.
More
03 May 2016 10:03 - 17 Sep 2016 08:55 #47639 by Thomas.Heiss
Replied by Thomas.Heiss on topic Deviation 5.0 has been released

MacGyverek wrote: I am using now 4.01 version. What about model.ini compatybility?? There is any changes??
I saw something about bug with swap AIL, ELE channels.


I played around with 200QX and 1-2 more models on V4.0.1, then older nightly-build, then newer nightly-build.
Model.ini files were not incompatible as far as I can tell. Might depend on setup.


What bug id are you referring to?
The AIL <-> ELEV channel bug which is known to me is for CCPM120 flybar helis but it is more Cyclic1<->Cyclic2 swapping instead of AIL/ELEV.
Different behavior for advanced mixer GUI, simple mixer GUI, FBL, CCPM120.
Hexfet and PhracturedBlue did not (yet) touch heli mixer C code, so in 5.0 release you have to fight with the same things as older releases/nightly-builds.
There are about 3-5 heli threads with more detail informations and linking two Mantis bug ids...


Update 17/09/2016:
Yes, there are still known heli issues - and also some new issues (not seen before) with the committed heli templates according to several posted threads after 5.0 rls: www.deviationtx.com/forum/6-general-disc...eased?start=60#53953


If you upgrade you would need to check all your models (correct servo movement, mixers) anyways...
It happend to me once that my heli cyclic servo was swapped normal<->reverse when I was playing with Indigos nightly builds and upgraded to one nightly-build.


YES, IMHO you really should upgrade from V4.0.1 release: www.deviationtx.com/forum/3-feedback-que...-nightly-build#46790

Make a model backup first!!
Last edit: 17 Sep 2016 08:55 by Thomas.Heiss. Reason: new issues, new link to description #53953 and linked heli summary analysis developer thread
More
03 May 2016 12:19 #47649 by auceto
Replied by auceto on topic Deviation 5.0 has been released
About all thanks a lot to PhracturedBlue and other guys
for this great job...

Has anyone downloaded the new user manual from User Manual section?
I try to do this but the file is corrupted...

any solutions?
More
03 May 2016 12:47 #47652 by lcc014
Replied by lcc014 on topic Deviation 5.0 has been released
Any chance to support Futaba FASST protocol in the future release ? I saw that 5.0 supports Futaba FHSS protocol. :)
More
03 May 2016 12:52 - 03 May 2016 12:54 #47653 by vlad_vy
Replied by vlad_vy on topic Deviation 5.0 has been released
Futaba FASST use other RF chip (aside from cyrf6936, A7105, CC2500, nRF24L01), not supported by Deviation.

I don't know what is wrong with new user manual from User Manual section, but I can open it by Foxit Reader. Adobe Reader can't open it.
Last edit: 03 May 2016 12:54 by vlad_vy.
More
03 May 2016 12:57 - 03 May 2016 12:59 #47656 by Thomas.Heiss
Replied by Thomas.Heiss on topic Deviation 5.0 has been released
FASST = different chip; higher RX prices (vlad was faster). FASST != telemetry (FASSTest)
Please see these answers:
www.deviationtx.com/forum/6-general-disc...ns/1397-futaba-fasst
www.deviationtx.com/forum/3-feedback-que...utaba-s-binding#2252
www.deviationtx.com/forum/protocol-devel...futaba-s-fhss-system
www.deviationtx.com/forum/3-feedback-que...-futaba-with-devo-10
www.deviationtx.com/forum/protocol-devel...t/5591-futaba-s-fhss
www.deviationtx.com/forum/protocol-devel...xk-protocol-question
Last edit: 03 May 2016 12:59 by Thomas.Heiss.
  1. Forum
  3. General
  5. General Discussions
  7. Deviation 5.0 has been released
Time to create page: 0.161 seconds
Powered by Kunena Forum
Force desktop display