Notice

The forum is in read only mode.

replacement stock 2.4 module

spiegel
Offline

21 May 2013 05:40 #10183 by spiegel

Replied by spiegel on topic replacement stock 2.4 module

Thank you for the answers.
I am ready to replace it. All the parts are prepared:
Antenna, cable, pin socket and module.
As the below picture, do I connect blue circles to red circles?

vlad_vy
Offline

21 May 2013 05:53 - 21 May 2013 05:56 #10184 by vlad_vy

Replied by vlad_vy on topic replacement stock 2.4 module

No need to do it. You can fix module at place by any other means.

Last edit: 21 May 2013 05:56 by vlad_vy.

airheli1201
Topic Author
Offline

31 May 2013 23:34 #10470 by airheli1201

Replied by airheli1201 on topic replacement stock 2.4 module

I just installed the devo 8s module to my 7e. Do I need to modify the tx.ini to get full power and range?

vlad_vy
Offline

01 Jun 2013 05:16 #10474 by vlad_vy

Replied by vlad_vy on topic replacement stock 2.4 module

Check that you have at tx.ini

...
[modules]
enable-cyrf6936=B12
has_pa-cyrf6936=1
...

Neo2a
Offline

26 Mar 2014 06:21 #21839 by Neo2a

Replied by Neo2a on topic replacement stock 2.4 module

Dear Friends,
Please Help me,
Can I update my Devo 12 transmitter
to Devo 12S if I exchange the ( WK-DEVO-S-MOD )?
Walkera online support person said I can not.
Is it valid? No way to updae?
Thank you
Neo2a

FDR
Offline

26 Mar 2014 06:31 #21840 by FDR

Replied by FDR on topic replacement stock 2.4 module

Yes you can.
The case will be different, but nevermind.

Here are the sources, which have the module:
www.ehirobo.com/transmitters-receivers/m...-upgrade-module.html
www.hobbyone.com.hk/cn/product.jsp?id=10896

Neo2a
Offline

26 Mar 2014 06:37 #21841 by Neo2a

Replied by Neo2a on topic replacement stock 2.4 module

Thank You

moss
Offline

04 Dec 2014 19:26 #26766 by moss

Replied by moss on topic replacement stock 2.4 module

WK-DEVO-S-MOD

makes the transmitters be able to use telemetry? (i.e. has a new RX path?)

Is there an MCU on this board?

92zb
Offline

12 Aug 2016 09:51 #52698 by 92zb

Replied by 92zb on topic replacement stock 2.4 module

PhracturedBlue wrote: look at the docs for installing a module on your radio in the 'Downloads' section. You'll find a pic that labels the pins

I could not find this doc on Walkera site. Would you please be more preciese. Thanks.

FDR
Offline

12 Aug 2016 12:35 #52701 by FDR

Replied by FDR on topic replacement stock 2.4 module

PB didn't refer to the Walkera site, but our own Downloads section, however since than it was moved into the Wiki:
www.deviationtx.com/wiki/rf_module_installation

Time to create page: 0.102 seconds

Force desktop display

Notice

replacement stock 2.4 module

Attachments: