What about Assan?

HappyHarry
Offline

20 Aug 2016 21:27 #52949 by HappyHarry

Replied by HappyHarry on topic What about Assan?

nice work bud

Please Log in or Create an account to join the conversation.

Bisky
Offline

21 Aug 2016 06:44 #52955 by Bisky

Replied by Bisky on topic What about Assan?

Nice woek Pascal

I faund out when i was selling my assan receivers, not all worked with a guys module which was an eary wersion. He could not bind the 6ch receiver whit ppm out and some 4ch. All of them worked with my module. My was at least a year younger.

Ultimate 7E + range mod + 3x2 switch mod + 3in1 module
Devo F7 XMS + 4in1 module

Please Log in or Create an account to join the conversation.

planger
Offline

21 Aug 2016 07:52 #52957 by planger

Replied by planger on topic What about Assan?

I've got a 4 channel receiver to play with. It works fine with everything I'm giving it.

I just need to figure out how the ID / channel is mapped...

Please Log in or Create an account to join the conversation.

planger
Offline

21 Aug 2016 15:58 #52980 by planger

Replied by planger on topic What about Assan?

Assan fully reversed

Source code to be ported on Deviation located here: github.com/pascallanger/DIY-Multiprotoco...l/ASSAN_nrf24l01.ino

- Pascal

Please Log in or Create an account to join the conversation.

Bisky
Offline

21 Aug 2016 16:08 #52981 by Bisky

Replied by Bisky on topic What about Assan?

planger wrote: Assan fully reversed

Source code to be ported on Deviation located here: github.com/pascallanger/DIY-Multiprotoco...l/ASSAN_nrf24l01.ino

- Pascal

Well done

Ultimate 7E + range mod + 3x2 switch mod + 3in1 module
Devo F7 XMS + 4in1 module

Please Log in or Create an account to join the conversation.

joloebig
Offline

21 Aug 2016 18:36 #52985 by joloebig

Replied by joloebig on topic What about Assan?

nice job, this will save a lot off rx from sale, i have more than 10 assan rx....

btw did test it with v1 rx, or only v2?
they are compatible,normaly, v1 is using only one chanel.

Please Log in or Create an account to join the conversation.

planger
Offline

21 Aug 2016 19:07 - 21 Aug 2016 19:35 #52988 by planger

Replied by planger on topic What about Assan?

The TX I've worked on is an ASSAN X8D 2.4Ghz V2. It does use 2 frequencies, one fix and another one randomely moving at every boot.
The RX is a X8R4H mini series. I can't see V2 written on it. So I assume it's a V1...Since the TX and RX communicate to bind, there could be a difference at this stage... Let's hope that my hack will work also on a V2.
I don't have anything else to test and I'm ready to ship back the TX+RX to my friend.

- Pascal

Last edit: 21 Aug 2016 19:35 by planger.

Please Log in or Create an account to join the conversation.

joloebig
Offline

21 Aug 2016 19:30 #52989 by joloebig

Replied by joloebig on topic What about Assan?

THX Pascal for you work.
The assan minis 4/6 chanel are V2. the 6/7 chanel with the black housing are also v2
the big once with the external antenna have stickers
the V1 are the only the 6/7 chanel with white housing and IIRC the 3 chanel car rx.
if you compile a running version incl the afhds2 mod from goebish for 12S i can do the test, i have a lot off assan stuff here.
reg
doro

Please Log in or Create an account to join the conversation.

DonKracho
Offline

21 Aug 2016 21:53 #52993 by DonKracho

Replied by DonKracho on topic What about Assan?

Wow, well done

Thank you very much for your work! I own about 35 Assan receivers, all V2. I'm going to test it when I have a NRF24L01 TX Module installed.

Please Log in or Create an account to join the conversation.

planger
Offline

23 Aug 2016 10:48 #53030 by planger

Replied by planger on topic What about Assan?

Good news, I have reports that it works on X8R6 Mini and X8R6M Micro.
It's also working on my X8R4H Mini.

Please Log in or Create an account to join the conversation.

Bisky
Offline

23 Aug 2016 14:14 #53033 by Bisky

Replied by Bisky on topic What about Assan?

planger wrote: Good news, I have reports that it works on X8R6 Mini and X8R6M Micro.
It's also working on my X8R4H Mini.

Nice work

It needs to be programmed into deviation...

Ultimate 7E + range mod + 3x2 switch mod + 3in1 module
Devo F7 XMS + 4in1 module

Please Log in or Create an account to join the conversation.

planger
Offline

23 Aug 2016 14:23 #53035 by planger

Replied by planger on topic What about Assan?

It's a straight forward protocol which should not be complicated to integrate.

- Pascal

Please Log in or Create an account to join the conversation.

goebish
Offline
I Void Warranties

30 Aug 2016 11:48 #53274 by goebish

Replied by goebish on topic What about Assan?

I'll do it ...

Please Log in or Create an account to join the conversation.

goebish
Offline
I Void Warranties

30 Aug 2016 14:43 #53281 by goebish

Replied by goebish on topic What about Assan?

Almost done, I only have to remove the delays in the callback

Please Log in or Create an account to join the conversation.

goebish
Offline
I Void Warranties

30 Aug 2016 15:19 - 30 Aug 2016 15:19 #53282 by goebish

Replied by goebish on topic What about Assan?

Here are some test build:
www.dropbox.com/sh/e5db4h6elbsesz0/AACRo...SDojx1v9pTlFjpa?dl=0

Code:
github.com/goebish/deviation/blob/protoc...col/assan_nrf24l01.c

Please report

Last edit: 30 Aug 2016 15:19 by goebish.

Please Log in or Create an account to join the conversation.

Bisky
Offline

30 Aug 2016 19:44 #53295 by Bisky

Replied by Bisky on topic What about Assan?

I will give it a test, after I get back from holidays.

Nice work goebish

Ultimate 7E + range mod + 3x2 switch mod + 3in1 module
Devo F7 XMS + 4in1 module

Please Log in or Create an account to join the conversation.

planger
Offline

30 Aug 2016 21:09 #53302 by planger

Replied by planger on topic What about Assan?

goebish wrote: Almost done, I only have to remove the delays in the callback

Yes you are right... I shouldn't have done that... I'll correct it as well.

- Pascal

Please Log in or Create an account to join the conversation.

Bisky
Offline

05 Sep 2016 19:24 - 05 Sep 2016 19:25 #53523 by Bisky

Replied by Bisky on topic What about Assan?

Installed the nrf24l01 today, tested ASSAN binding. When binding the receiver is blinking red led, when binded DEVO 7e makes a sound, led's are blinking red and yellow. It's not working after removing battery and bind plug and reattaching battery. I get blinking red and yellow led. Tested 4x R8R4H, all doing the exact same thing.

Ultimate 7E + range mod + 3x2 switch mod + 3in1 module
Devo F7 XMS + 4in1 module

Last edit: 05 Sep 2016 19:25 by Bisky.

Please Log in or Create an account to join the conversation.

goebish
Offline
I Void Warranties

06 Sep 2016 00:12 #53533 by goebish

Replied by goebish on topic What about Assan?

Ok, I'll check what's wrong.

Please Log in or Create an account to join the conversation.

anthony7288
Offline

06 Sep 2016 03:07 - 06 Sep 2016 03:10 #53536 by anthony7288

Replied by anthony7288 on topic What about Assan?

blackmoon wrote: Could this be of any help ?

tomsik.eu/assan_x8_hack

and Assan X8 receiver hacking continued

tomsik.eu/assan_firmware

There is a assan_scan archive at the end of the page, firmware and library for avr...

Only thing not working is binding.

I know it's a rx firmware but we all know that PB is a magician

hi everyone

anyone have file hack ASSAN from that Website ? i can not go to website because website died .

Last edit: 06 Sep 2016 03:10 by anthony7288.

Please Log in or Create an account to join the conversation.

Time to create page: 0.073 seconds

Force desktop display