The New Hubsans

Fernandez wrote: Certainly if you have figured out the protocol, lets add it, thats the full power of deviation one tx for anything !!!
HK310 TX and Robitronic TL-3C

Yes, I think I got it

It's pretty similar to existing HiSky protocol, except it operates @ 250kbps instead of 1Mbps, carries extra failsafe packets and has different timing (frequency hop every 5ms, send 3 packets during those 5ms).
Also, stock transmitter sends bind packets at regular interval, at lowest RF power possible after disabling the PA, that's something we can't do with deviation (at least with the nrf24l01+PA / LNA breakouts most people are using...). That may be a problem so I think I'll only send bind packets when BIND button is pressed in Deviation.

edit: test build available
www.deviationtx.com/forum/protocol-devel...100-and-xy3000#42086

Here's a new test build for H501S, please check each features:

CHANNEL5, Leds
CHANNEL6, Altitude Hold
CHANNEL7, Still camera
CHANNEL8, Video camera
CHANNEL9, Headless
CHANNEL10, RTH
CHANNEL11, GPS Hold

Devo 7e
Devo 10
sources

Aren't some features mutually exclusive, like RTH or GPS HOLD ? Might be better to have them a on 3 positions channel (No GPS, GPS Hold, RTH) ?

Ok, I'll try to understand why 9 10 and 11 don't work, at least you can disable altitude hold

Ah OK I understand 1:30AM is not fine to test GPS features, good night then

Take care when testing GPS ... looks like some people already had fly-aways, with stock TX

Russia ?

Can you check this build please ?
I did some cleanup and I'd like to make sure I didn't break anything before I start to add telemetry.

Doesn't need to check everything, just that it binds, controls work, vTX frequency change works, leds on/off works.

Thanks

Devo 7e
Devo 10

Ah, it's +10°C here in France, and I find it's already too cold

Ah Ok, I'll revert my last commits then. I'll clean it up later.