Yi Zhan i6S capture

SirDomsen
Offline

12 Feb 2016 22:16 - 12 Feb 2016 23:46 #43060 by SirDomsen

Replied by SirDomsen on topic Yi Zhan i6S capture

Hi,

MT99XX is currently not in the Nightlies, is it?

BTW: Can Confirm That MT99XX works with CX Model CX023

It works with the MT9916 and the H7 Protocol Option. I didn't notice any differences between these two.

Flip is on Channel 6

Greetz
Domsen

Last edit: 12 Feb 2016 23:46 by SirDomsen.

Deezyy2476
Offline

12 Sep 2018 14:04 - 12 Sep 2018 14:06 #70836 by Deezyy2476

Replied by Deezyy2476 on topic Yi Zhan i6S capture

I’m having a problem binding to the T8Sg plus, maybe I’m just missing something little, but can someone tell me whT to do I have my settings as so ... I’ve tried binding by turning on the drone , then powering on the drone, binding while on ect ect.... I read up and couldn’t find any help. What does this mean???? warning: only 1 hardcoded TX ID plz help, thanks in advance

Last edit: 12 Sep 2018 14:06 by Deezyy2476. Reason: Needed attachments

Deezyy2476
Offline

15 Sep 2018 09:37 #70910 by Deezyy2476

Replied by Deezyy2476 on topic Yi Zhan i6S capture

Was this ever solved? I've looked everywhere for binding procedures and nothing

goebish
Offline
NRF Weirdo

15 Sep 2018 14:10 - 15 Sep 2018 14:12 #70917 by goebish

Replied by goebish on topic Yi Zhan i6S capture

It should bind right away, if it doesn't work it could be that:
- this is a new revision that's using a different protocol or transceiver
- this protocol is emulating a xn297L @ 250kbps with the nrf24l01, same as the EAchine E010, it often doesn't work with the 4-in-1 transceivers (that's what inside the t8sg ...) because of not accurate enough oscillator and this can't be fixed in software.

Last edit: 15 Sep 2018 14:12 by goebish.

Time to create page: 0.074 seconds

Notice

Yi Zhan i6S capture

Attachments:

Attachments: