×

Notice

The forum is in read only mode.
  1. Forum
  3. Development
  5. Protocol Development
  7. R9M protocol on deviation

R9M protocol on deviation

More
14 May 2018 03:17 - 14 May 2018 03:18 #69205 by anthony
R9M protocol on deviation was created by anthony
hello Developers

any idea about protocol R9M on multiprtocol Deviation ?, I see RX mini is so cheap , about 9 $ but modul is not cheap .So will great if multiprotocol add R9M into system

and modul SX1276 100mw or 1w is so cheap on market
Last edit: 14 May 2018 03:18 by anthony.
More
14 May 2018 05:58 #69210 by vlad_vy
Replied by vlad_vy on topic R9M protocol on deviation
FrSky R9 and R9M use 900MHz and different hardware, so it's impossible.
More
14 May 2018 06:58 #69212 by ajtank
Replied by ajtank on topic R9M protocol on deviation
Perhaps he is suggesting to piggyback a SX1276 module onto existing multimodule. Connection involves voltage supply, SPI bus and RF switch control.
More
14 May 2018 07:49 - 14 May 2018 07:50 #69213 by Fernandez
Replied by Fernandez on topic R9M protocol on deviation
There is a topic op on this, there are now several systems using the Semtech modules, which have now been proven themselves......
-TBS crossfire
-Frsky L9
-In addition there are diy projects as Qlrs, and some more



www.deviationtx.com/forum/7-development/...-sx1278-sx1276#68370
Last edit: 14 May 2018 07:50 by Fernandez.
More
15 May 2018 01:23 #69225 by anthony
Replied by anthony on topic R9M protocol on deviation

Fernandez wrote: There is a topic op on this, there are now several systems using the Semtech modules, which have now been proven themselves......
-TBS crossfire
-Frsky L9
-In addition there are diy projects as Qlrs, and some more



www.deviationtx.com/forum/7-development/...-sx1278-sx1276#68370

when frsky publish RX mini SMALL AND CHEAP , i forget system QLRS.
  1. Forum
  3. Development
  5. Protocol Development
  7. R9M protocol on deviation
Time to create page: 0.033 seconds
Powered by Kunena Forum
Force desktop display