Bugs 3 mini

It works for me but I did have the same problem at a time,dypro my fix was to use another model file,I replaced a model file I no longer use but that was the fix,@Goebish,I am going to do your procedure with both 7E and 10 right now,I will report back in a few.To be clear it's only a bind and not arming yet,correct?

I formatted fresh and it's still not working.

The Bugs 3 Mini successfully bound to both 7e and 10 via your step by step with 1 exception for the devo 10
- open the models/modelsxx.ini file in a text editor (under Windows, use notepad++ for exemple, not the builtin notepad, it does corrupt end of lines ...)
- under the [protocol_opts] section, fill the Address= field with the value from the blue column.
I didn't see the address field in the devo 10 model/protocol,so I did it from the protocol option screen on the transmitter.

What are you getting Dypro?Did you try to bind another model that uses the nfr24?

C0ckpitvue 777 wrote: What are you getting Dypro?Did you try to bind another model that uses the nfr24?

It just reboots when I click bind.

Did you try another model file?When I was getting that I just tried a model I didn't use anymore scrolled to the bugs 3 mini protocol and bind,afterwards I changed the name and replaced it with the bugs 3 mini,,

C0ckpitvue 777 wrote: Did you try another model file?When I was getting that I just tried a model I didn't use anymore scrolled to the bugs 3 mini protocol and bind,afterwards I changed the name and replaced it with the bugs 3 mini,,

Just uses a blank model from the download. Can you share your model file?

EDIT: I don't even see [protocol_opts] in model ini

goebish wrote: I noticed I forgot something in the code, I'm not sure it would have caused a crash, but download again and retry ...

Working now and bound.

DPyro wrote:

C0ckpitvue 777 wrote: Did you try another model file?When I was getting that I just tried a model I didn't use anymore scrolled to the bugs 3 mini protocol and bind,afterwards I changed the name and replaced it with the bugs 3 mini,,

Just uses a blank model from the download. Can you share your model file?

File Attachment:

File Name: model20.ini
File Size:24 KB

DPyro wrote:

goebish wrote: I noticed I forgot something in the code, I'm not sure it would have caused a crash, but download again and retry ...

Working now and bound.

Excellent....

You're the man bro.....Thank you for your hard work.

goebish wrote: I started analyzing the payload and I've a question, the arm and picture switches seems to have short and long press duration options, I couldn't find a manual online, can someone explains how they work please ?

Short press=Arm
Long Press=Disarm

Photo short press= Photo
Photo Long press=Video
only when mjx camera is pugged into fpv port

goebish wrote: Ok, thanks, and what about the switch that's hard to push next to throttle, I suppose this is angle/acro mode ? And the switch on the back, is it for flips ?

I believe you're talking about the flight Mode button between angle/acro.
www.mediafire.com/view/jqhz8b5a01ddh6y/I...%255B2%255D.jpg/file

Here is a link for the manual for the b3 mini..
www.firstquadcopter.com/download/mjx-bug...ser-manual-download/