Jumper T8SG V2 Plus and Crossfire

More
13 Dec 2019 16:04 #75574 by Hans-Udo
Replied by Hans-Udo on topic Jumper T8SG V2 Plus and Crossfire
Hi Konatsu, I did not remove the first pin. I took it just so as it was.

Please Log in or Create an account to join the conversation.

More
13 Dec 2019 16:29 - 13 Dec 2019 16:38 #75575 by Konatsu
Replied by Konatsu on topic Jumper T8SG V2 Plus and Crossfire

Hans-Udo wrote: Hi Konatsu, I did not remove the first pin. I took it just so as it was.


I did restore that pin, but behavior is the same;/

Last edit: 13 Dec 2019 16:38 by Konatsu. Reason: new video link

Please Log in or Create an account to join the conversation.

More
13 Dec 2019 17:37 #75576 by Hans-Udo
Replied by Hans-Udo on topic Jumper T8SG V2 Plus and Crossfire
you have to push the button on the crossfire module for binding. the button in the middle of the LED.

Please Log in or Create an account to join the conversation.

More
13 Dec 2019 17:48 #75577 by Konatsu
Replied by Konatsu on topic Jumper T8SG V2 Plus and Crossfire

Hans-Udo wrote: you have to push the button on the crossfire module for binding. the button in the middle of the LED.

And how can i configure it after binding?

Please Log in or Create an account to join the conversation.

More
14 Dec 2019 09:53 #75584 by Hans-Udo
Replied by Hans-Udo on topic Jumper T8SG V2 Plus and Crossfire
after binding you can configure it normaly in model and mixer menu

Please Log in or Create an account to join the conversation.

More
18 Dec 2019 16:29 - 18 Dec 2019 18:34 #75599 by Konatsu
Replied by Konatsu on topic Jumper T8SG V2 Plus and Crossfire
I can't. CRSF menu is not working. RX is only working when i change it to PPM ;/

On deviation-t8sg_v2_plus-v5.0.0-e0ab3bc i can enter CRSF menu but it is empty

Update
I've removed pin 1 and it is now working on this build.
Last edit: 18 Dec 2019 18:34 by Konatsu.

Please Log in or Create an account to join the conversation.

More
19 Dec 2019 05:54 - 19 Dec 2019 05:55 #75601 by Denis
Replied by Denis on topic Jumper T8SG V2 Plus and Crossfire

Konatsu wrote: I can't. CRSF menu is not working. RX is only working when i change it to PPM ;/

On deviation-t8sg_v2_plus-v5.0.0-e0ab3bc i can enter CRSF menu but it is empty

Update
I've removed pin 1 and it is now working on this build.


did you do the last night build? deviation-t8sg_v2_plus-v5.0.0-2b4606e. (18.12.2019) Does crossfire work with her?
Last edit: 19 Dec 2019 05:55 by Denis.

Please Log in or Create an account to join the conversation.

More
19 Dec 2019 16:03 #75602 by Konatsu
Replied by Konatsu on topic Jumper T8SG V2 Plus and Crossfire
I've installed deviation-t8sg_v2_plus-v5.0.0-2b4606e but i can't get into CRSF menu. Nothing is happening when i press enter on it.

Please Log in or Create an account to join the conversation.

More
19 Dec 2019 16:37 #75603 by vlad_vy
Replied by vlad_vy on topic Jumper T8SG V2 Plus and Crossfire
It doesn't implemented in nightly builds. PR #840

Please Log in or Create an account to join the conversation.

More
19 Dec 2019 16:56 #75604 by vlad_vy
Replied by vlad_vy on topic Jumper T8SG V2 Plus and Crossfire
PR #840 merged, you can test it with next nightly build.

Please Log in or Create an account to join the conversation.

More
19 Dec 2019 22:29 #75605 by Denis
Replied by Denis on topic Jumper T8SG V2 Plus and Crossfire

vlad_vy wrote: PR #840 merged, you can test it with next nightly build.


how to enable rssi?

Please Log in or Create an account to join the conversation.

More
21 Dec 2019 09:50 #75608 by Konatsu
Replied by Konatsu on topic Jumper T8SG V2 Plus and Crossfire
OK, everything is working on latest build deviation-t8sg_v2_plus-v5.0.0-1ec5369

Thank all for help

Please Log in or Create an account to join the conversation.

More
05 Jan 2020 01:43 #75662 by Grajek
Replied by Grajek on topic Jumper T8SG V2 Plus and Crossfire
Can you bind with the Jumper T8SG V2 plus, Crossfire Micro TX and nano Rx? Is there a binding feature within Deviation? Everything Im finding says you have to bind on another Transmitter first. I don't have a Taranis. Could I buy the Crossfire TX Lite and wire it and bind?

Please Log in or Create an account to join the conversation.

More
05 Jan 2020 07:30 #75665 by Konatsu
Replied by Konatsu on topic Jumper T8SG V2 Plus and Crossfire
Now you can do all this things from menu on t8sg. Also you can change vtx settings by Smart audio :)

Please Log in or Create an account to join the conversation.

More
05 Jan 2020 08:56 - 05 Jan 2020 08:57 #75666 by Konatsu
Replied by Konatsu on topic Jumper T8SG V2 Plus and Crossfire
What should I enable to get betaflight menu working?
Now it is a empty tab.

Attachments:
Last edit: 05 Jan 2020 08:57 by Konatsu.

Please Log in or Create an account to join the conversation.

More
14 Jan 2020 03:09 #75707 by Frazam
Replied by Frazam on topic Jumper T8SG V2 Plus and Crossfire

Konatsu wrote: Now you can do all this things from menu on t8sg. Also you can change vtx settings by Smart audio :)


Does this mean after the hardware mod and inserting the crossfire module, the t8sg v2 plus has full functionality?

I ask because i have a t8sg v2 plus carbon on the way but after reading about the limited crossfire support, I'm thinking if I should return it and get the t16 instead. I'd rather not cause I like the smaller size of the t8sg carbon, but if crossfire has limited functions I'll have no choice. I'd rather pay a little extra to have full functionality than be crippled. Thanks.

Btw, I joined specifically to learn more about crossfire compatibility.

Please Log in or Create an account to join the conversation.

More
22 Jan 2020 14:44 #75796 by Denis
Replied by Denis on topic Jumper T8SG V2 Plus and Crossfire

Konatsu wrote: Now you can do all this things from menu on t8sg. Also you can change vtx settings by Smart audio :)

Should vtx be tbs, or any other manufacturer?

Please Log in or Create an account to join the conversation.

More
22 Jan 2020 16:43 #75797 by Konatsu
Replied by Konatsu on topic Jumper T8SG V2 Plus and Crossfire
Any other supporting Smart Audio. I was using akk fx3-ultimate

Please Log in or Create an account to join the conversation.

Time to create page: 0.055 seconds
Powered by Kunena Forum