1. Forum
  3. Search

Advanced Search

Search Results (Searched for: irx-ir8m)

  • vlad_vy
  • vlad_vy's Avatar
24 Jan 2018 10:04
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

If you want to calibrate sticks and knobs, I think you need toggle shoulder switches to you (open switch), since they connected to AUX4 and AUX5 lines.
  • vlad_vy
  • vlad_vy's Avatar
24 Jan 2018 09:45
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

antennenfreund wrote: Does anyone have a left to the manual? Or can she upload? Unfortunately, there was no one with me. I can not tie the recipient who was there. What do I have to do? Could anyone help me, please?

Many Thanks


You can use Devo 10 manual
www.deviationtx.com/user-manual
  • vlad_vy
  • vlad_vy's Avatar
24 Jan 2018 09:37 - 24 Jan 2018 09:42
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

SeByDocKy wrote: Can we update the IR8M with the T8SG NB ? Someone already tested ? If not I will probably .... I don't think I can brick the radio ?


I think you can flash T8SG nightly build. First backup Tx filesystem and check if it has firmware *.dfu file, in order you can return back.

If it will work, LCD driver is the same as T8SG.

Bear in mind you will have RUD and AIL reversed.
  • dc59
  • dc59's Avatar
24 Jan 2018 09:31
Replied by dc59 on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

vlad_vy wrote: Surprise!!!

iRangeX iRX-IR8M has Jumper T8SG firmware (t8sg-v5.x.x-2017-09-19).


Sorry,I missed your post.
Do they used same LCD driver as T8SG⁇
  • antennenfreund
  • antennenfreund's Avatar
24 Jan 2018 09:25
Replied by antennenfreund on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Does anyone have a left to the manual? Or can she upload? Unfortunately, there was no one with me. I can not tie the recipient who was there. What do I have to do? Could anyone help me, please?

Many Thanks
  • dc59
  • dc59's Avatar
24 Jan 2018 08:10
Replied by dc59 on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

SeByDocKy wrote:
Can we update the IR8M with the T8SG NB ? Someone already tested ? If not I will probably .... I don't think I can brick the radio ?

I'm not sure,I don't have this TX!
  • SeByDocKy
  • SeByDocKy's Avatar
24 Jan 2018 07:48
Replied by SeByDocKy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

dc59 wrote: That's wired, around 2:28 of this video:


this TX used T8SG FW,vbut I confirmed with Jumper(T8SG maker), this TX is not produced by Jumper.


Can we update the IR8M with the T8SG NB ? Someone already tested ? If not I will probably .... I don't think I can brick the radio ?
  • vlad_vy
  • vlad_vy's Avatar
24 Jan 2018 04:55
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

I don't understand logic of implementation iRangeX iRX-IR8M, really.
  • vlad_vy
  • vlad_vy's Avatar
24 Jan 2018 04:06 - 24 Jan 2018 04:32
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

SeByDocKy wrote: For my radio only the switches A & B are 3-way ..... other are two-way


Can you say how exactly switches changing at Channel monitor? Have you AUX4 and AUX5 at Channel monitor?

SWA:
SWB:
SWC:
SWD:
  • dc59
  • dc59's Avatar
24 Jan 2018 03:06
Replied by dc59 on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

That's wired, around 2:28 of this video:

this TX used T8SG FW,vbut I confirmed with Jumper(T8SG maker), this TX is not produced by Jumper.
  • antennenfreund
  • antennenfreund's Avatar
23 Jan 2018 22:35
Replied by antennenfreund on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

My remote control came today too.

But I do not know how I can tie .. it does not work.

The recipient of this is ... I do not know what I have to hire.

www.banggood.com/818CH-Mini-Receiver-Wit...earch&cur_warehouse= CN

How does it work? The receiver flashes .. then I go to bind .. but nothing happens.

Then I bought another receiver.

This one:

hobbyking.com/de_de/frsky-r-xsr-ultra-mi...iver-eu-version.html

It is EU version!

I have FrskyX set .. synonymous EU!

I hold the button and put the battery to it. All lamps light up permanently.

I go on bandage and nothing happens! What am I doing wrong?
  • SeByDocKy
  • SeByDocKy's Avatar
23 Jan 2018 17:22 - 23 Jan 2018 17:22
Replied by SeByDocKy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

For my radio only the switches A & B are 3-way ..... other are two-way

First bug I found ... with the current deviationTX installed (T8SG based from 09-19)... As soon as you open the USB device... then after radio refuses to be turned on .... You need to disconnect the battery plug
  • SeByDocKy
  • SeByDocKy's Avatar
23 Jan 2018 17:19
Replied by SeByDocKy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

I just received mine ....

For me I got 4x2-way switches and 2x3-way....... Pots not visible from channel monitor ....

;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x4, 3x3, 3x2, 3x1, 2x8, 2x7, 2x6, 2x5, 2x4, 2x3, 2x2, 2x1, potx2, potx1
;May occur more than once if necessary.
;Add nostock if stock FMOD and HOLD switches have been removed.
  extra-switches = nostock
  extra-switches = 3x4
; extra-switches = 2x2
  extra-switches = potx2
;
;Audio player connected to UART (Devo12/S internally, others via trainer port): audiofx, dfplayer
;voice=
;
;Enable if audio device is wired to uart5 instead of ppm on devo7e-256
;voice-uart5=1
;
;button_types: trim-all, trim-(left|right)-(up|down|both)
;May occur more than once if necessary.
;extra-buttons=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
; enable-cyrf6936 = B12
; has_pa-cyrf6936 = 1
  enable-a7105    = A13
  has_pa-a7105    = 1
  enable-cc2500   = A14
  has_pa-cc2500   = 1
  enable-nrf24l01 = A15
  has_pa-nrf24l01 = 1
; enable-multimod = A13
  • vlad_vy
  • vlad_vy's Avatar
23 Jan 2018 16:21 - 23 Jan 2018 16:30
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Are you sure? On the mainboard image I definitely see connections and diodes for four 3-pos switches and connections for two 2-pos switches. The original "hardware.ini" enabled four 3-pos switches and two pots (AUX4 and AUX5).

extra-switches = 3x4
extra-switches = potx2

It looks like shoulder switches connected to AUX4 and AUX5 lines. So they havn't names. I don't know for what they used.
  • SeByDocKy
  • SeByDocKy's Avatar
23 Jan 2018 14:32
Replied by SeByDocKy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

I just received mine ....

For me I got 4x2-way switches and 2x3-way....... Pots not visible from channel monitor ....
  • vlad_vy
  • vlad_vy's Avatar
23 Jan 2018 05:40
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Changing "hardware.ini" doesn't help enable shoulder switches. From mainboard images it looks like they connected to AUX4 and AUX5 pots. I don't know why they needed.
  • vlad_vy
  • vlad_vy's Avatar
23 Jan 2018 04:25 - 23 Jan 2018 04:25
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Confirmed. Stock iRangeX iRX-IR8M "hardware.ini" file is:

;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x4, 3x3, 3x2, 3x1, 2x8, 2x7, 2x6, 2x5, 2x4, 2x3, 2x2, 2x1, potx2, potx1
;May occur more than once if necessary.
;Add nostock if stock FMOD and HOLD switches have been removed.
  extra-switches = nostock
  extra-switches = 3x4
; extra-switches = 2x2
  extra-switches = potx2
;
;Audio player connected to UART (Devo12/S internally, others via trainer port): audiofx, dfplayer
;voice=
;
;Enable if audio device is wired to uart5 instead of ppm on devo7e-256
;voice-uart5=1
;
;button_types: trim-all, trim-(left|right)-(up|down|both)
;May occur more than once if necessary.
;extra-buttons=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
; enable-cyrf6936 = B12
; has_pa-cyrf6936 = 1
  enable-a7105    = A13
  has_pa-a7105    = 1
  enable-cc2500   = A14
  has_pa-cc2500   = 1
  enable-nrf24l01 = A15
  has_pa-nrf24l01 = 1
; enable-multimod = A13
  • vlad_vy
  • vlad_vy's Avatar
22 Jan 2018 14:11
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

I suspect that iRangeX use "hardware.ini" from T8SG without modification, so "H" and "G" shoulder switches are undefined.
  • vlad_vy
  • vlad_vy's Avatar
22 Jan 2018 06:26 - 22 Jan 2018 06:28
Replied by vlad_vy on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

File Attachment:


OK, now I know the switch config: 3x4 (A, B, C, D) + 2x2 (G, H)
;switch_types: 3x4, 3x3, 3x2, 3x1, 2x8, 2x7, 2x6, 2x5, 2x4, 2x3, 2x2, 2x1, potx2, potx1
;May occur more than once if necessary.
;Add nostock if stock FMOD and HOLD switches have been removed.
  extra-switches = nostock
  extra-switches = 3x4
  extra-switches = 2x2
  extra-switches = potx2
;
  • Fernandez
  • Fernandez's Avatar
20 Jan 2018 23:18
Replied by Fernandez on topic iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

Category: General Discussions

Yes that works well and it is the lightest full range diversity telemetry receiver out there !
Displaying 461 - 480 out of 496 results.
  1. Forum
  3. Search
Time to create page: 0.883 seconds
Powered by Kunena Forum
Force desktop display