Standard Mixer Take-2

PhracturedBlue
Topic Author
Offline

24 Feb 2013 07:11 #6929 by PhracturedBlue

Replied by PhracturedBlue on topic Standard Mixer Take-2

did you replace the heli_std template? You need the most recent one to not get the invalid ini message.

Please Log in or Create an account to join the conversation.

PhracturedBlue
Topic Author
Offline

24 Feb 2013 07:12 #6930 by PhracturedBlue

Replied by PhracturedBlue on topic Standard Mixer Take-2

and reset sw is removed from std gui timer page. It didn't make any sense with the limited switch options.

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

24 Feb 2013 07:26 #6931 by vlad_vy

Replied by vlad_vy on topic Standard Mixer Take-2

Sorry. I'm forgot replace template folder. Now it works.

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

25 Feb 2013 05:14 #7011 by vlad_vy

Replied by vlad_vy on topic Standard Mixer Take-2

Why we need Std GUI 'D/R & Expo' up to 125%, what incorrectly translated to Advanced GUI 'Expo&D/R' 100%, if we have 'Travel adjust' up to 175%, what correctly translated to channel scale 175%???

Please Log in or Create an account to join the conversation.

PhracturedBlue
Topic Author
Offline

25 Feb 2013 05:22 #7012 by PhracturedBlue

Replied by PhracturedBlue on topic Standard Mixer Take-2

the problem is that the travel-adjust is set at the channel output whereas the scale is set at the mixer. You also have cyclic mixing thrown in. So setting the scale on the mixer is far easier, but it adds risk to allow it on the advanced mixer. I am not yet sure how I want to proceed on this one.

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

25 Feb 2013 14:31 #7027 by vlad_vy

Replied by vlad_vy on topic Standard Mixer Take-2

Maybe as usual? Channel scale (travel adj) up to 150%, channel limit (limit adj) up to 150% and mixer scale (D/R) up to 125%.

Please Log in or Create an account to join the conversation.

coaster
Offline

25 Feb 2013 18:21 #7043 by coaster

Replied by coaster on topic Standard Mixer Take-2

Hi all

i am a little bit confused, if i change the travel +-130 %
in the travel adjust menu for a channel, must the scale in the
DR mixer also changed to 130% ?

cheers
Graziano

Please Log in or Create an account to join the conversation.

domcars0
Offline

25 Feb 2013 19:41 #7045 by domcars0

Replied by domcars0 on topic Standard Mixer Take-2

coaster wrote: Hi all

i am a little bit confused, if i change the travel +-130 %
in the travel adjust menu for a channel, must the scale in the
DR mixer also changed to 130% ?

cheers
Graziano

Hi travel adjust is relatif to servo, not to mixer...

Devo 10 (+7e) owner. It's mine, please don't touch it with your big fingers

Please Log in or Create an account to join the conversation.

coaster
Offline

25 Feb 2013 19:50 #7046 by coaster

Replied by coaster on topic Standard Mixer Take-2

Hi domcars0,
that means the 100% in the DR menu correspond
to the value (130%) in the travel adjust ?

cheers
Graziano

Please Log in or Create an account to join the conversation.

domcars0
Offline

25 Feb 2013 22:49 #7056 by domcars0

Replied by domcars0 on topic Standard Mixer Take-2

Aïe...It's more complicated

Travel Adj is the Travel of a servo .... while DR depend of many other things: the mixer on which it's applied, the swashplate type (120,90...), the curves if any etc...
Sorry as my english is very bad, I hope somebody else will be able to clarify this.

Devo 10 (+7e) owner. It's mine, please don't touch it with your big fingers

Please Log in or Create an account to join the conversation.

gapi
Offline

26 Feb 2013 02:44 #7059 by gapi

Replied by gapi on topic Standard Mixer Take-2

Gosh! Just when I am clicking on how to configure in the Advanced mode this Standard mode gets it together. Funny!

I just configured my Master CP VIA both ways and really like both but the Standard is more suited to my skill level.

Thanks To All

Please Log in or Create an account to join the conversation.

Archades
Offline

31 Mar 2013 02:15 #8318 by Archades

Replied by Archades on topic Standard Mixer Take-2

Quick question. In standard gui, can I change the output of channels for the cyclic? I helped setup a trex 500 and cyclic 1 and 2 were reversed, I managed to fix it with editing the model.ini but would prefer to just do it in the transmitter whilst keeping the standard gui. I can do it in advanced but prefer the standard interface for now.

Please Log in or Create an account to join the conversation.

Hexperience
Offline

31 Mar 2013 02:44 #8319 by Hexperience

Replied by Hexperience on topic Standard Mixer Take-2

Wouldn't you just adjust the cyclic mixing to a negative value? So rather than 60,60,60 you might have -60,-60,+60 ?

Maybe I'm not understanding the problem though...
Cheers

There are 10 types of people in this world. Those that understand binary and those that don't.

Please Log in or Create an account to join the conversation.

Archades
Offline

31 Mar 2013 03:00 #8320 by Archades

Replied by Archades on topic Standard Mixer Take-2

Problem was the pitch and ail servo's were getting each other's signal instead of their own.

Please Log in or Create an account to join the conversation.

sbstnp
Offline

31 Mar 2013 04:55 #8322 by sbstnp

Replied by sbstnp on topic Standard Mixer Take-2

Archades wrote: Problem was the pitch and ail servo's were getting each other's signal instead of their own.

Easier to swap connectors?

Devo 10 + 4in1
~~Spektrum Dx9~~
FrSky Taranis + TBS Crossfire

Please Log in or Create an account to join the conversation.

Archades
Offline

31 Mar 2013 06:44 #8328 by Archades

Replied by Archades on topic Standard Mixer Take-2

Easy but lazy, i wanted to do it the right way

Please Log in or Create an account to join the conversation.

Time to create page: 0.112 seconds

Force desktop display