JD 395 cx-10

Can you compile for the Devo 7E too ? I guess there will be some other testers owning the Devo 7E

...and some interesting info:
if i turn on both quads, and then run the binding sequence, both will fly the same time
so the binding does not have unique pairing code...

This means that the receiver on the quad does not propagate any ID back.
This is common with many RC-toy protocols.

Still the transmitter can choose an individual ID per session (random or per TX) - often affecting RX/TX Address (think of "MAC-Address") and / or RF Channel(s) it sends on.

And can you please clarify: You've paired using original Transmitter ?

YES.

1. turn on quad 1
2. turn on quad 2
3. turn on original tx
4. binding process (up-down)
5. both stop blinking, both fly

both RED BOARD

billmester wrote: both RED BOARD

The red board is using the skywalkr protocol ....
Now it's the green edition Under investigation

Hi,
I know is not exactly on topic, but also I, did the "synchro dance" with 3*V272.
And the reason could be: all this new micro quads, regardless the shape, all are kind of the same conception (clones, clones of clones, etc). So, would not be a surprize also for the CX-10s to behave like a "swarm". Which is not bad atoll, it's quite funny .

I have a red board CX 10 and a Devo 10. I can find "YD717" but I can't find the "Sky Wlkr" option. Does anybody have the programming file for the CX 10 for a Devo 10?

Thanks

Same with me (at the moment). Seems that 4.0.1does not contain it yet. Upgrading now...

billmester wrote: Same with me (at the moment). Seems that 4.0.1does not contain it yet. Upgrading now...

I friend of mine did the mods for me. I have V4.0.1. Is this the latest?

latest RELEASED version. there are "nightly builds" with plenty of upgrades

billmester wrote: latest RELEASED version. there are "nightly builds" with plenty of upgrades

Please let me know if you get the SkyWlr after the update!

stuck with the update...
see the topic: FW upgrade - TX not seen in DFU, only as USB drive

I've done the update o NB of 2014.08.01 (deviation-devo7e-v4.0.1-92e1705) and it has "Sky Wlr". To select it, first highlight the YD717 as protocol, then press ENT. Here, in the subselection, you can choose: "YD717", "Sky Wlr" or "XinXun".

Done it again, now it works. Have no idea, what happened first time
RED CX-10's are flying nicely now

One question left: how to make the flips?

Thanks
bm

billmester wrote: Done it again, now it works. Have no idea, what happened first time
RED CX-10's are flying nicely now

One question left: how to make the flips?

Thanks
bm

assign Channel5 on a switch

Edit: WITH updated .ini


OK... aaaand?
What should I program to the switch?
What action is equivalent to the button press + direction move?

This is my .ini so far, works well, only need the flip to work...

So - I got it to work.

BIIIG thanks to SeByDocKy.

Now I can use the flip function like this:
-flip GEAR switch to 1
-do the flip with a FULL movement of the AIL or ELE
-flip GEAR switch back to 0

Notes:
-If I leave GEAR in 1, then I can make 2-3 flips then no more... need to switch back to 0 always for 100% sure flips
-If I use decreased range ("beginner mode", see the .ini file above), it will work only randomly or not at all... need to use the full range for flips
-Flips are sensitive to TRIM. If you are using too big trims, flips may not happen

bm

Hi, I have Devo7e with 2 3pos extra switches and CX10 green board. All CX10 sold here in Thailand, as far as I had seen are green board version. I'm itchy to test the new protocol. How close are you guys at cracking it?