Deviation v5.0.0 build with latest protocols

vlad_vy wrote: "Deviation v5.0.0 build with latest protocols" (based on v5.0.0 release core)

* Fix Corona protocol, from hexfet

(25.03.2018)

Files deleted, see below...

Hello vlad,

I want to put Corona on my 8s, where do I find the correct file.

I already have devo8 v5.0.0 installed some time ago and also Banggood 4 in 1

Thank you and hexfet

ok, got it partly sorted, have Corona on tx but the is an asterix next to it???? what does this mean???

and how do I bind it????

tia

One step closer.

I thought I had all chips enabled but that was not the case, cc2500 now enabled, asterix is gone.

But I cannot bind Corona, using following method:
Corona DSSS V2 RXs: CR8D, CR6D and CR4D

To bind V2 RXs you must follow the below procedure (original):

press the bind button and power on the RX
launch a bind from Multi -> the RX will blink 2 times
turn off the RX and TX(=Multi)
turn on the RX first
turn on the TX(=Multi) second
wait for the bind to complete -> the RX will flash, stop and finally fix
wait some time (more than 30 sec) before turning off the RX
turn off/on the RX and test that it can reconnect instantly, if not repeat the bind procedure

Have done fine tuning thing, still no bind.

Also not able to bind Frsky which uses cc2500

Devo and spektrum protocols work, all connections to 4 in 1 are correct.

???????????

6936, 2401 and 7105 all tested and working.

Only 2500 protocols (Corona and Frsky) not working.

???????

Anyone

Got Frsky to bind consistently.

But nothing I do will bind Corona.

Some CC2500 protocols need to have the frequency fine tuned.
Highlight the protocol and press ENT, then adjust Freq-Fine until it binds.
Try adjusting by steps of 10 to do it more quickly, it usually works.

BirdBarber wrote: Some CC2500 protocols need to have the frequency fine tuned.
Highlight the protocol and press ENT, then adjust Freq-Fine until it binds.
Try changing the value by 10 points at a time.

I said a couple of posts back that I already tried fine tuning.

Also, hexfet has posted that he fixed an error in the protocol and the fix will be in tonights nightly.

fixed

I tried the emulator for the devo 7e, and the "Fullspeed" option under DSM2/X protocol is present, but on my devo7e I can only enable Telemetry, and OrangeRX options. Is it a memory limitation of the radio? Thanks.