Advanced Search

After a year I finally got the time and install the RF module from my old WK-2801 pro, to Devo 7E.
I follow the pinout suggested by vlad_vy and it works fine.

Also now I can bind Devo 7E, with Spektrum SPM4650 (SRXL2 protocol) micro receiver. With the stock RF module I couldn't do it.
With 150mW output on TX, the range goes up to 520m before rxloss and GPS rescue begin (2.5" quad with Betaflight 4.4.2.).

So I guess now I am jumping to expressLRS pages for more range?

Okay, take a look at the mode settings in Devo 7. There, a value is sent to the Rodeo receiver on a channel, not channel 1 - 4, via a switch. The value will most likely have the three values -100% / 0% / +100%.

Once you have checked this information, program this function on the same channel # of the Devo 7e. Select the switch on the Devo 7e that you want to assign the function to as source (Src). You can keep the "1 to 1" as the curve.

See documentation point 9.2.4.: deviationtx.com/user-manual/user-manual-7e-10

First check on the channel monitor whether the correct values are displayed on the Devo 7e on the correct channel, as was done with the Devo 7.

Thank you for your reply and apologies for taking so long to get back to you, I didnt receive any notification that I had any reply.
Its running the Deviation version devo7e-v5.0.0.

Anybody?

Looking for a Devo 12s,
Preferably mint with stock case, but will take NFG units, and modded ones as well, df player, 4 in 1, let me know what you have and what you want for it.

I am in California, and can PayPal, Venmo, cash or trade.

I have
F12s
F7DS
F7
8s x2
Scout 350
$$$

My 12s died and I miss it so... (Main board needed)

HMU here and let me know
Thanks all.
-T

Hi,

first of all we have to know witch Firmware the Devo 7e have? Original Walkera Firmware or Deviation?

I have flown a few drones before but they all come with their own transmitter and never had a hold or a Fmod switch.
I purchased a Devo 7e and a Walkera Rodeo 110 and have managed to bind but am nervous to fly it in on intermediate or advaced mode. The devo 7 has a Mix switch that toggles between STABILIZE / INTERMEDIATE / ADVANCED flight modes, but dont know how to recreate this kind of thing on the Devo 7e. Is this something I would do on the Fmod switch? Any help would be much appreciated.

Came across this post earlier when my 7e wouldn't bind to a Lemon satelite (LM0037A). I'm posting now as I've accidentally come across a fix that I hope will help.

I changed the RF Module to a Devo10 4-in-1:

===>LINK<===

I changed the module to clean up my 7e and also get a full power module for DSMX. I figured two birds if I just change the module rather than mod the existing one and keep the extra modules and antenna(s).

I hope this solves the problem.

Now, it shows as a drive in usb mode but I cannot open it as a drive to read the files or format it.

Hello! First, let me say THANK YOU to the developers of DeviationTX. It's great, cool and brilliant.
I'm taking my first steps in the hobby, now I've added an ELRS module and am setting up a model to control TinyWhoop with an alienwhoop zer0 controller.
The model uses 10 channels:
1 to 4 - AETR
5 - arm/disarm at GEAR switch
6 to 8 used for flight modes at MIX switch (ACRO/HORIZON/RACEMODE_HORIZON)
9 - for "juicy"/"full bronx" stick mode at AILE DIR switch
10 - for LED ON/OFF at ELEV DIR switch

Hi, have a look here:

www.deviationtx.com/forum/7-development/...dule?start=940#55157

Scroll a little down to the section Devo8, Devo F12E (PCB looks slightly different but MCU and pin are the same) in this post.

You will find this information about the hardware.ini

[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
enable-cyrf6936 = B12
has_pa-cyrf6936 = 1
enable-a7105 = A13
has_pa-a7105 = 1
enable-cc2500 = A14
has_pa-cc2500 = 1
enable-nrf24l01 = B3
has_pa-nrf24l01 = 1
; enable-multimod = A13

I'm very grateful for any help here... thank you

I have checked and rechecked the connections...... posting here and asking for help is the very last option because its a very slim chance that help will come. As far as hardware.ini goes, to be honest< I'm not 100% sure what is should read. I installed the 4 n 1 multi module so I modified it to read

[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
; enable-cyrf6936 = B12
; has_pa-cyrf6936 = 1
enable-a7105 = A13
has_pa-a7105 = 1
enable-cc2500 = A14
has_pa-cc2500 = 1
enable-nrf24l01 = A14
has_pa-nrf24l01 = 1
enable-multimod = A13

If this is wrong, please let know.

Thanks again

I looked up the ELRS and it sounds great but I'm not clear on what protocols it has, is universal ?

Hi,

I have deviation Tx on Devo F7 with 4-module.

Anyone has used deviation Tx with Frsky R-XSR ?

As far as I understand, the protocol should be ACCST D16 ?

Thanks

You have uploaded the wrong firmware. Here is a video, that might help:

Seven5555 wrote: Thanks for letting me know and thank you very much hexfet for keeping a pulse in this place.

I put the memory in and a new 4n1. I have had trouble getting things going, I have been able to troubleshoot all the problems I've had with the info here but I'm stuck i get "Missing Modules: MultiMod" error. I've been messing with the hareware.ini but more errors..... I keep searching but have found no solution.

So, is this F12e useless for the Open Tx and Eagle Tx that was mentioned?

Hello, check connections and hardware.ini file configuration, multiple times. Yesterday I flashed my devo again.. and did a silly mistake. It took me quite a lot, to figure it out. Of course it would be easier, if I copied my hardware.ini file in the first place
You can not install Open Tx or Edge Tx, but you could hook up an ELRS module.. it is brilliant! Right now I'm trying to attach the module, and make it look close to stock I will do some testing soon.

Hello, If I solder connector on trainer ports board, which pins should correspond to a nano tx? Probably it would be better to solder directly to the 4 pin connector... I don't use trainer port. anyway. Here's what I found as a reference, I think devo 7e is the same.
edit: I made a 3.5mm connector, as it is already mentioned earlier by Hexfet, crsf serial port goes to the tip and middle ring(together), ground goes to bottom ring. At first glance, everything works fine, And maybe I've missed something, but I haven't seen an option for receivers setting in edge tx! My devo is 7e 256. Is it really possible to achieve the high baud rate? I know redpine is faster on devo, could it be the same case with Elrs too??

OK that will do nicely, thank you very much.

Perfect!
Thank you. I will try to flash it onto my RC.

Try this link:

www.deviationtx.com/downloads-new/catego...exfet-nightly-build#

Hi all, Hi Hex,

just wondering, why the files for the DEVO 10 are not showing up in the download link anymore.
I would like to also modify my radio in order to use ELRS... but couldn't find the files following the link (just empty).

**************
27 Jan 2023 01:09 #78205
Replied by hexfet on topic expressLRS
The dfu in the t8sg_v2 archive is zero length. Sorry about that. My build box has been crashing and must've interrupted that build.

I've rebuilt and re-uploaded. New download link is here
**************

Or is it just fine to use the following file from the download section from "2021-06-11"?

deviation-devo10-v5.0.0-c84450e.zip
Thx for the work you guys put into this.

BR
Martin