Ultimate7e tutorial: Processor upgrade

More
07 May 2016 16:34 #47973 by Arakon
Replied by Arakon on topic Ultimate7e tutorial: Processor upgrade
Indeed.. it was one bad pin apparently. Buzzed them all against the edge of the pad and one had no connection. Oddly, it wasn't one connected to USB... nevertheless, I appear to have a fully working upgraded devo 7e now.

Please Log in or Create an account to join the conversation.

More
07 May 2016 16:43 #47976 by silpstream
Replied by silpstream on topic Ultimate7e tutorial: Processor upgrade
WooHoo!!! :woohoo: Add another to the count!

Please Log in or Create an account to join the conversation.

More
07 May 2016 16:46 #47977 by Arakon
Replied by Arakon on topic Ultimate7e tutorial: Processor upgrade
Actually had to remove it again because it shifted slightly just as the solder melted.. second time it attached beautifully, except for that one pin.
Attachments:

Please Log in or Create an account to join the conversation.

More
07 May 2016 17:36 #47981 by silpstream
Replied by silpstream on topic Ultimate7e tutorial: Processor upgrade
Looks beautiful sitting next to that full range module (I'm assuming that's what it is). Nice soldering job! :cheer:

Please Log in or Create an account to join the conversation.

More
07 May 2016 22:51 #47996 by HappyHarry
Replied by HappyHarry on topic Ultimate7e tutorial: Processor upgrade
I just finished 2 more successful ult7e upgrades, thankfully with no issues as these weren't my own tx's lol!

Please Log in or Create an account to join the conversation.

More
07 May 2016 23:58 #47998 by dc59
Replied by dc59 on topic Ultimate7e tutorial: Processor upgrade

HappyHarry wrote: I just finished 2 more successful ult7e upgrades, thankfully with no issues as these weren't my own tx's lol!


Which MCU do you use? 256k or 512k
Thanks.

Please Log in or Create an account to join the conversation.

More
08 May 2016 00:24 #48001 by HappyHarry
Replied by HappyHarry on topic Ultimate7e tutorial: Processor upgrade
neither, like in my own one I used the 384k version STM32F103RDT6 as the 256k versions I first received I thought may have been cheap clones/faulty, and when I went looking for replacements my local supplier didn't have the 256k (RCT6) or 512k (RET6) in stock. so i got the 384k instead, but as all 3 versions work i'd just use what you can find

Please Log in or Create an account to join the conversation.

More
08 May 2016 01:04 #48012 by Antfurn
Replied by Antfurn on topic Ultimate7e tutorial: Processor upgrade
Hi Harry, where did you get them from in the UK? I'd like to do my 7e too.

Please Log in or Create an account to join the conversation.

More
08 May 2016 03:05 #48018 by silpstream
Replied by silpstream on topic Ultimate7e tutorial: Processor upgrade

HappyHarry wrote: I just finished 2 more successful ult7e upgrades, thankfully with no issues as these weren't my own tx's lol!

That makes 10! :woohoo:

Please Log in or Create an account to join the conversation.

More
08 May 2016 13:25 #48028 by HappyHarry
Replied by HappyHarry on topic Ultimate7e tutorial: Processor upgrade

Antfurn wrote: Hi Harry, where did you get them from in the UK? I'd like to do my 7e too.


I got them from RS bud >>

256k £5.52ea
384k £3.02ea
512k £6.78ea

you can get them from farnell as well and even ebay has them, but i'd stick with a reputable source as those on ebay might be seconds as those that I got from ebay didn't even identify themselves properly in the stlink software. but ymmv

Please Log in or Create an account to join the conversation.

More
08 May 2016 13:27 #48029 by HappyHarry
Replied by HappyHarry on topic Ultimate7e tutorial: Processor upgrade

silpstream wrote:

HappyHarry wrote: I just finished 2 more successful ult7e upgrades, thankfully with no issues as these weren't my own tx's lol!

That makes 10! :woohoo:


yeah, I think as more people complete a successful swap others will be more inclined to do it :)

Please Log in or Create an account to join the conversation.

More
08 May 2016 13:56 #48033 by Arakon

Please Log in or Create an account to join the conversation.

More
08 May 2016 14:04 #48035 by mtx63
Replied by mtx63 on topic Ultimate7e tutorial: Processor upgrade
MCU upgrade for my soldering station, no problem.
only docker for my old notebook. Devo 7E 256 k ultimate another further away.

Dieter

Please Log in or Create an account to join the conversation.

More
08 May 2016 14:20 #48036 by Arakon
Replied by Arakon on topic Ultimate7e tutorial: Processor upgrade
Hm.. out of curiosity, where is the binding data stored? I noticed that after the CPU swap, my D4R bind was lost.

Please Log in or Create an account to join the conversation.

More
08 May 2016 15:18 #48038 by victzh
Replied by victzh on topic Ultimate7e tutorial: Processor upgrade
Binding is stored in RX, but your TX ID has changed because it is derived from MCU ID.

Please Log in or Create an account to join the conversation.

More
08 May 2016 16:02 - 08 May 2016 16:08 #48042 by Arakon
Replied by Arakon on topic Ultimate7e tutorial: Processor upgrade
That's what I needed to know, thanks. Urgh.. now I'm not sure I want to redo my main transmitter, I'd have to disassemble half my quads to get to the bind button again.
Last edit: 08 May 2016 16:08 by Arakon.

Please Log in or Create an account to join the conversation.

More
08 May 2016 16:27 #48048 by HappyHarry
Replied by HappyHarry on topic Ultimate7e tutorial: Processor upgrade

mtx63 wrote: MCU upgrade for my soldering station, no problem.
only docker for my old notebook. Devo 7E 256 k ultimate another further away.

Dieter


for those who don't have capable hardware to build their own deviation images for the ult7e i have created a thread here >> ult7e builds , this will be update periodically to the latest nightly but also has the first 5.0.0 release in it. please consider trying the nightly files to assist in bugzapping as this will help the devs find and fix any issues :)

Please Log in or Create an account to join the conversation.

More
08 May 2016 22:26 #48078 by HappyHarry
Replied by HappyHarry on topic Ultimate7e tutorial: Processor upgrade
guys as the 256, 384 and 512k versions all have more ram than the stock chip do we gain anything by changing the code to enable it?

Please Log in or Create an account to join the conversation.

More
09 May 2016 00:46 - 09 May 2016 00:47 #48086 by PhracturedBlue
Replied by PhracturedBlue on topic Ultimate7e tutorial: Processor upgrade

HappyHarry wrote: guys as the 256, 384 and 512k versions all have more ram than the stock chip do we gain anything by changing the code to enable it?

no.
Last edit: 09 May 2016 00:47 by PhracturedBlue.

Please Log in or Create an account to join the conversation.

More
17 May 2016 04:16 - 17 May 2016 04:34 #48570 by Cereal_Killer
Replied by Cereal_Killer on topic Ultimate7e tutorial: Processor upgrade
Add me to the list!

File Attachment:

Taranis X9E | DEVO 10 | Devo U7E | Taranis Q7

What I do in real life: rivergoequestrian.com/
Last edit: 17 May 2016 04:34 by Cereal_Killer.

Please Log in or Create an account to join the conversation.

Time to create page: 0.088 seconds
Powered by Kunena Forum