1. Forum
  3. Development
  5. Protocol Development
  7. JD 395 cx-10

JD 395 cx-10

More
29 May 2015 01:56 - 29 May 2015 03:31 #33162 by goebish
Replied by goebish on topic JD 395 cx-10
Repo and test builds updated
www.deviationtx.com/downloads-new/catego...-10a-blue-board-cx11
Last edit: 29 May 2015 03:31 by goebish.

Please Log in or Create an account to join the conversation.

More
29 May 2015 04:02 #33165 by mbk17
Replied by mbk17 on topic JD 395 cx-10

goebish wrote: Repo and test builds updated
www.deviationtx.com/downloads-new/catego...-10a-blue-board-cx11


Thanks again goebish for the continued work. Any development which enables compatibility for my only quad that doesn't work with my 7e is immensely appreciated.
I updated to the latest update you just posted but I still cannot seem to get my blue board cx10 to bind with my 7e. Any ideas what could be the issue?

Please Log in or Create an account to join the conversation.

More
29 May 2015 08:30 #33169 by vasiliy_gr
Replied by vasiliy_gr on topic JD 395 cx-10
Great! My devo10 is also working now with cx-10a.

Please Log in or Create an account to join the conversation.

More
29 May 2015 12:03 #33173 by goebish
Replied by goebish on topic JD 395 cx-10

mbk17 wrote: I updated to the latest update you just posted but I still cannot seem to get my blue board cx10 to bind with my 7e. Any ideas what could be the issue?

Can you check out this one please ?
www.dropbox.com/s/9jiog715lvo5l09/deviat...0.1-d195cab.zip?dl=0

Please Log in or Create an account to join the conversation.

More
29 May 2015 12:21 - 29 May 2015 12:21 #33174 by hexfet
Replied by hexfet on topic JD 395 cx-10
Build from the latest repo is working for me. Binds immediately and flies well.
Last edit: 29 May 2015 12:21 by hexfet.

Please Log in or Create an account to join the conversation.

More
29 May 2015 15:33 #33178 by mbk17
Replied by mbk17 on topic JD 395 cx-10

goebish wrote:

mbk17 wrote: I updated to the latest update you just posted but I still cannot seem to get my blue board cx10 to bind with my 7e. Any ideas what could be the issue?

Can you check out this one please ?
www.dropbox.com/s/9jiog715lvo5l09/deviat...0.1-d195cab.zip?dl=0

That didn't work as well. I swear there has to be something wrong with the ini's I'm trying.

Please Log in or Create an account to join the conversation.

More
29 May 2015 15:36 #33179 by goebish
Replied by goebish on topic JD 395 cx-10
Just start from a new model / fresh .ini, but I doubt this is the problem.

Please Log in or Create an account to join the conversation.

More
29 May 2015 16:21 #33185 by victzh
Replied by victzh on topic JD 395 cx-10
May be protocol options? As far as I understand the module serves both green and blue board.

Please Log in or Create an account to join the conversation.

More
29 May 2015 16:22 #33186 by goebish
Replied by goebish on topic JD 395 cx-10
Yes, Format protocol option should be set to Blue-A.

Please Log in or Create an account to join the conversation.

More
29 May 2015 16:46 - 29 May 2015 17:01 #33187 by mbk17
Replied by mbk17 on topic JD 395 cx-10

goebish wrote: Yes, Format protocol option should be set to Blue-A.

The fresh ini with just the cx10 protocol did not bind. How do I set protocol options? Sorry I have very little knowledge here.
Also, you said "10-A" mine is simply a blue board cx-10, would that be the issue?
Last edit: 29 May 2015 17:01 by mbk17.

Please Log in or Create an account to join the conversation.

More
29 May 2015 17:06 - 29 May 2015 17:12 #33189 by goebish
Replied by goebish on topic JD 395 cx-10

How do I set protocol options?

Highlight the protocol name (CX10) in Model menu -> Model setup then press ENT.
Last edit: 29 May 2015 17:12 by goebish.

Please Log in or Create an account to join the conversation.

More
29 May 2015 17:22 - 29 May 2015 17:31 #33190 by mbk17
Replied by mbk17 on topic JD 395 cx-10

goebish wrote:

How do I set protocol options?

Highlight the protocol name (CX10) in Model menu -> Model setup then press ENT.

It binds! Thanks a bunch goebish. The yaw is pretty solid, however the pitch is a little slow. Still very impressive that my blueboard cx10 bind with my 7e. Now I have 1 controller to rule them all.
Last edit: 29 May 2015 17:31 by mbk17.

Please Log in or Create an account to join the conversation.

More
29 May 2015 17:53 #33192 by victzh
Replied by victzh on topic JD 395 cx-10
So, in a sense you were right :-) If you would have been provided with .INI file, you'd be OK. But now you have extra knowledge. Which is power :-)

Please Log in or Create an account to join the conversation.

More
29 May 2015 17:57 #33193 by goebish
Replied by goebish on topic JD 395 cx-10

mbk17 wrote: The yaw is pretty solid, however the pitch is a little slow.

Did you set channel 5 to high position or assigned a switch for it ?

Please Log in or Create an account to join the conversation.

More
29 May 2015 18:14 - 29 May 2015 18:16 #33195 by mbk17
Replied by mbk17 on topic JD 395 cx-10
I did not, and I have no idea how to do that. I'm assuming I need to edit something in the ini?
Interestingly, I had the opposite problem with the syma x11. That thing was so fast lol, I liked the fast mode but I would like to have had a switch assigned to rotate between slow and fast.
Last edit: 29 May 2015 18:16 by mbk17.

Please Log in or Create an account to join the conversation.

More
29 May 2015 18:23 - 29 May 2015 18:33 #33196 by Philipp
Replied by Philipp on topic JD 395 cx-10
The "Blue-A" does work with a green pcb CX11 (early 2015), too!
Unfortunately my CX11 is missing a prop, so not actual flying..
Binding does not work the way it should though, changing the output power in the "Model Setup" menu after "Re-Init" is necessary to bind my CX11 to the Devo7e.

I'm glad somebody is working on supporting these little inexpensive quads! Cudos to you guys, I really enjoy the little Devo7e for this small stuff.
Let me know if you want some high res photos of my CX11 pcb!

I've also got a cheap Saleae Clone and some free time on hand, if you could use additional data.

Video of the binding process: (apparently very low resolution in Dropbox web player, download for HD)
www.dropbox.com/s/vqz1e4f1yqpgduc/VID_20150529_200315.mp4?dl=0
Last edit: 29 May 2015 18:33 by Philipp.

Please Log in or Create an account to join the conversation.

More
29 May 2015 19:17 #33201 by goebish
Replied by goebish on topic JD 395 cx-10
Thanks, I noticed a problem with RF power setting at init, this is probably related, I'll fix it.

Question for nrf24 experts: what is the LNA_HCURR flag of the RF_SETUP register for ? Is it better to have it enabled or disabled ?

Please Log in or Create an account to join the conversation.

More
29 May 2015 19:34 - 29 May 2015 19:44 #33202 by goebish
Replied by goebish on topic JD 395 cx-10

mbk17 wrote: I did not, and I have no idea how to do that. I'm assuming I need to edit something in the ini?

No, everything can be done in the GUI.
- Go to Model Menu -> Mixer
- Next to 5-Gear, press "None"
- Now change "None" to "Simple"
- in Src, change "None" to "FMODE0"
- Press Save

File Attachment:


Now if FMODE switch is high you'll have high rate, low rate if switch is low.
Last edit: 29 May 2015 19:44 by goebish.

Please Log in or Create an account to join the conversation.

More
29 May 2015 19:40 #33203 by victzh
Replied by victzh on topic JD 395 cx-10
LNA_HCURR is obsolete for nRF24L01+, but may be actual for BK2421 - it's a clone of nRF24L01 (no plus). Setting it to 1 should do no harm.

Please Log in or Create an account to join the conversation.

More
29 May 2015 19:55 - 29 May 2015 19:55 #33204 by goebish
Replied by goebish on topic JD 395 cx-10
Thanks, I was reading the nRF24l01 datasheet, not +.

Philipp wrote: Binding does not work the way it should though, changing the output power in the "Model Setup" menu after "Re-Init" is necessary to bind my CX11 to the Devo7e.


This should be fixed in this build:
www.dropbox.com/s/h4mne24rd6xk2tv/deviat...0.1-762512d.zip?dl=0
Last edit: 29 May 2015 19:55 by goebish.

Please Log in or Create an account to join the conversation.

  1. Forum
  3. Development
  5. Protocol Development
  7. JD 395 cx-10
Time to create page: 0.093 seconds
Powered by Kunena Forum
Force desktop display