1. Forum
  3. Development
  5. Protocol Development
  7. Bugs 3 mini

Bugs 3 mini

More
22 Mar 2019 19:24 #73514 by goebish
Replied by goebish on topic Bugs 3 mini
I'm not sure but try with Channel 10.

Please Log in or Create an account to join the conversation.

More
23 Mar 2019 14:57 #73517 by ncfom
Replied by ncfom on topic Bugs 3 mini
Thanks for the suggestion .

I tried channel 10 on a switch for altitude hold, but no joy.

Channels 1-6 all work as they should . AETR, arm and lights

I have a Devo 7e.

Please Log in or Create an account to join the conversation.

More
25 Mar 2019 10:43 #73543 by goebish
Replied by goebish on topic Bugs 3 mini
Have you tried channels 7, 8 and 9 ?

I've implemented all the flags available on the Bugs 3 mini transmitter that C0ckpitvue 777 sent me, I believe the 3H is using the same transmitter, but maybe I'm wrong and it has an extra flag.
Do you have a logic analyzer ?

Please Log in or Create an account to join the conversation.

More
25 Mar 2019 13:08 #73546 by goebish
Replied by goebish on topic Bugs 3 mini
Also, make sure your firmware is up to date, I recently fixed an issue that affected channels 7, 8 and 9.

Please Log in or Create an account to join the conversation.

More
25 Mar 2019 14:48 #73547 by ncfom
Replied by ncfom on topic Bugs 3 mini
In my first post I asked for info on the bugs 3h assuming it would be the same for my eachine ex 2h as everything else works the same. I have tried channels 7,8,9, and 10. No joy
Firmware devo 7e v5.0.0-d21bf92
AH is not a necessity for me

Thank You for help

Please Log in or Create an account to join the conversation.

More
13 Apr 2019 23:41 #73874 by jbuck
Replied by jbuck on topic Bugs 3 mini
Just curious, is there a way to increase the rates for pitch and roll on the bugs 3 mini? I have it working fine but it doesn't have the crazy pitch and roll the regular deviated bugs 3 has. I have the jumper v2 plus and increased all rates to 125%

Please Log in or Create an account to join the conversation.

More
14 Apr 2019 08:58 - 14 Apr 2019 10:01 #73876 by goebish
Replied by goebish on topic Bugs 3 mini
I just made a test build with dynamic trims for Bugs3Mini protocol (same as Bugs3), please check if that's better like that:
www.dropbox.com/sh/ifli03dyvafr64n/AAD5K...zRFuCsyBjc-vcZa?dl=0

Max rate for this protocol is 100%, don't set it to 125%, that will only add some dead zones at the end of stick travel ...
Last edit: 14 Apr 2019 10:01 by goebish.

Please Log in or Create an account to join the conversation.

More
14 Apr 2019 13:02 - 14 Apr 2019 13:13 #73880 by goebish
Replied by goebish on topic Bugs 3 mini
@ncfom we now have a method to dump xn297 transmitters that doesn't involve using a logic analyzer nor a SDR device ( see here ) , would you like to help finding the missing flag for altitude hold on Bugs 3H ?
Last edit: 14 Apr 2019 13:13 by goebish.

Please Log in or Create an account to join the conversation.

More
14 Apr 2019 13:15 #73881 by C0ckpitvue 777
Replied by C0ckpitvue 777 on topic Bugs 3 mini

goebish wrote: I just made a test build with dynamic trims for Bugs3Mini protocol (same as Bugs3), please check if that's better like that:
www.dropbox.com/sh/ifli03dyvafr64n/AAD5K...zRFuCsyBjc-vcZa?dl=0

Max rate for this protocol is 100%, don't set it to 125%, that will only add some dead zones at the end of stick travel ...


Is this the reason it hesitates and pops out of pitch at full throttle?

Please Log in or Create an account to join the conversation.

More
14 Apr 2019 13:16 #73882 by goebish
Replied by goebish on topic Bugs 3 mini
No idea, would you like a test build with dynamic trims ? for which transmitter ?

Please Log in or Create an account to join the conversation.

More
14 Apr 2019 13:24 #73883 by C0ckpitvue 777
Replied by C0ckpitvue 777 on topic Bugs 3 mini
Devo 10

Please Log in or Create an account to join the conversation.

More
14 Apr 2019 13:31 #73884 by goebish
Replied by goebish on topic Bugs 3 mini
Ok, dropbox folder updated, let me know if it's faster ;)

Please Log in or Create an account to join the conversation.

More
14 Apr 2019 14:06 #73886 by C0ckpitvue 777
Replied by C0ckpitvue 777 on topic Bugs 3 mini
Thank you Goebish,as soon as It stop raining outside I'll test and report back..

Please Log in or Create an account to join the conversation.

More
14 Apr 2019 17:42 #73889 by C0ckpitvue 777
Replied by C0ckpitvue 777 on topic Bugs 3 mini
I was almost cited by the F.A.A for excessive speeds,I can confirm Goebish some how added rocket fuel into the diet of this bugs 3 mini.I just got to adjust the yaw and pitch trims to get it more stable..Thanks once again Goebish...

Please Log in or Create an account to join the conversation.

More
14 Apr 2019 19:49 #73890 by goebish
Replied by goebish on topic Bugs 3 mini
Thanks for testing!

Please Log in or Create an account to join the conversation.

More
15 Apr 2019 11:13 #73894 by jbuck
Replied by jbuck on topic Bugs 3 mini
Thanks goebish,I will reflash and try again this evening. Good tip on not using 125% for rates. Is this typical or just for some protocols? It just makes you "think" you're going 25% faster haha

Please Log in or Create an account to join the conversation.

More
15 Apr 2019 11:42 - 15 Apr 2019 11:43 #73896 by goebish
Replied by goebish on topic Bugs 3 mini
It is common to most "toy grade" protocols, typically protocols for which a standalone RX does not exist.
Last edit: 15 Apr 2019 11:43 by goebish.

Please Log in or Create an account to join the conversation.

More
16 Apr 2019 01:19 #73909 by jbuck
Replied by jbuck on topic Bugs 3 mini
I am still pretty much a noob at this updating process. I am not sure what to do once I open the dropbox and click on the jumper v2 plus. Which file do I need to update with in DFU mode? Maybe I need to do more research and figure out what to do

Please Log in or Create an account to join the conversation.

More
16 Apr 2019 01:27 - 16 Apr 2019 01:30 #73910 by C0ckpitvue 777
Replied by C0ckpitvue 777 on topic Bugs 3 mini
I have the devo 10 and I just update the dfu file in the folder,with the defuse tool
Last edit: 16 Apr 2019 01:30 by C0ckpitvue 777.

Please Log in or Create an account to join the conversation.

More
16 Apr 2019 01:32 #73911 by C0ckpitvue 777
Replied by C0ckpitvue 777 on topic Bugs 3 mini
I was wondering if there's a way to transition from acro to angle in flight w/out restarting the bind process like Hexet did with the Bugs 8 pro..

Please Log in or Create an account to join the conversation.

  1. Forum
  3. Development
  5. Protocol Development
  7. Bugs 3 mini
Time to create page: 0.076 seconds
Powered by Kunena Forum
Force desktop display