Eachine E010 inductrix clone data captures

@ robocog

i posted my ini in the E010 thread from Sebydocky on rcgroups in the micro multi rotor section. i'ts a zip file with instruction which button to push for headless and RTH. But forgot to mention flip function which is on the Hold switch on the 7E.

Sorted, not sure what I was doing wrong, set to ch6 -100 and +100 (and verified in ch monitor) when toggle'd it does indeed flip

As a humble end user with little in the way of geek to add to the project I'd like to say a massive thanks to everyone on the teams efforts and hard work on this

You guys rock my world!
Regards
Rob

Late last night I also discovered that another of my nano quads (Flying Gadgets NanoQuad Xtra) binds and flys perfectly with the LS114 protocol
It's like Christmas and all Birthdays coming at once because now my Devo 7E flys/drives/sails all the toys I own

Wish mine would bind.
Just installed the latest build but still no luck.
Just frustrating as my H8 mini flies great?

goebish wrote: I just updated the test builds, it should bind with any transmitter ID now.
www.dropbox.com/sh/myda7gwpwfhkbw4/AABZS...QEt7BWI1BWDh7Ja?dl=0

Are the changes also in the Nightly from 9-11-16? I'm looking for a build for my Devo F4. Thanks.

Thanks !

Thanks for the help but i still cant bind after all this.

even got another E010 to try but its no good

Guess i will use my H8 for FPV after all.

Maybe ive a faulty Nrl module?

Stecozz that's really weird. I too received today my second E010 and have no problem to bind it. if your other quads using a NRF bind ok your NRF module should be ok for the E010 too. You can always try my ini. It's in the Model config forum.

Alias_Hendrik wrote: Stecozz that's really weird. I too received today my second E010 and have no problem to bind it. if your other quads using a NRF bind ok your NRF module should be ok for the E010 too. You can always try my ini. It's in the Model config forum.

I did Alias but its still not binding.

Heres my hardware file,is that ok?

You should not use the windows notepad to edit ini's. Best to use Notepad++ for editing. Do you have only a single module installed? Only the NRF module and it's using A13? If so make a backup from your hardware ini and copy the one from the zip file to your Devo to try

.

Thanks Alias

Ive just re flashed and installed the latest nightly again and it Binds!!!!

Just getting to grips with the switches,its flipping a lot haha

Thanks to everyones patience with me

I could not get my E010 to bind to my 7e with the fixed ID, but after clearing out the ID it would bind. I'm using the latest nightly build.

I've noticed, though, that during flight, it will intermittently start flashing rapidly like it is not bound. I haven't had any time to test that more thoroughly. It seems to work, although it is VERY sensitive on the throttle. As soon as I get a chance I will try to determine if it is losing control while it is blinking. I also have another E010 still in the box, that I can open up and try.

i was able to bind my devo10 with the e010 initially but after changing some setting my binding failed. It appears to be the Tx power that caused the issue it SHOULD BE SET TO 10mW. At 30mW i can bind occassionally and on those time that i manages to bind there is a chance that the bind will break, and 100mW wont allow me to bind. Hope this information helps!

I have only a NRF module (in my 7E). I can bind both my red and green E010 on 30mW or 100mW without problem.

that's interesting. I'm on the 3 in 1 module, which i have just installed. and i only have a green e010 to try out the module.currently using the 15sept nightly build. I wonder did i have a poor solder for my module, the first time i tested my module i had a Missing Modules: CYRF6936 message. The message doesn't go away, I had to resolder some of the joints then it worked.

bevik, would you mind sharing your model.ini file? I'm having trouble getting my Devo10 to bind with the E010.

As requested E010 model file (devo10)

Hello.. im new to deviation firmware. Can i bind E010 to my devo 8? How it can be done? Thanks