Eachine E010 inductrix clone data captures

Arnold
Offline

07 Sep 2016 23:51 - 07 Sep 2016 23:52 #53612 by Arnold

Replied by Arnold on topic Eachine E010 inductrix clone data captures

goebish wrote: You can get the E010 for $10.99 for a few hours on bg
www.banggood.com/Eachine-E010-Mini-2_4G-...r-RTF-p-1066972.html

Bad news if you missed this deal, because, YIKES!, price increased to $19.98! (US$)

Too many hobbies & too many Devos!
Who knows where the time goes?

Last edit: 07 Sep 2016 23:52 by Arnold.

Please Log in or Create an account to join the conversation.

HappyHarry
Topic Author
Offline

08 Sep 2016 01:36 - 08 Sep 2016 01:37 #53616 by HappyHarry

Replied by HappyHarry on topic Eachine E010 inductrix clone data captures

it will drop down to $12.98 in the next few hours for the 10th anniversary deals promotion, though for how long i don't know

Last edit: 08 Sep 2016 01:37 by HappyHarry.

Please Log in or Create an account to join the conversation.

goebish
Offline
I Void Warranties

08 Sep 2016 07:54 #53623 by goebish

Replied by goebish on topic Eachine E010 inductrix clone data captures

It is $10.99 again

Please Log in or Create an account to join the conversation.

Stecozz
Offline

09 Sep 2016 07:56 #53672 by Stecozz

Replied by Stecozz on topic Eachine E010 inductrix clone data captures

Can i ask as a total beginner with deviation on my devo 7e, how do i get my E010 to bind?
Ive installed the nrf module and have even downloaded the model file for my h8 mini and that binds great.
Ive seen the builds on here but i dont know how to use them,can someone give me a model file they use for there E010 so i can copy it into my models like i did with the h8?
Many thanks

Please Log in or Create an account to join the conversation.

goebish
Offline
I Void Warranties

09 Sep 2016 09:01 #53679 by goebish

Replied by goebish on topic Eachine E010 inductrix clone data captures

Take your H8 model as a base file, then change protocol from Bayang to MJXq, then "click" ENTER on MJXq and select E010 format.
You should be able to bind then.

Please Log in or Create an account to join the conversation.

Stecozz
Offline

09 Sep 2016 11:30 #53684 by Stecozz

Replied by Stecozz on topic Eachine E010 inductrix clone data captures

Thanks, i will try tonight.

Many thanks

Please Log in or Create an account to join the conversation.

Stecozz
Offline

09 Sep 2016 18:03 #53692 by Stecozz

Replied by Stecozz on topic Eachine E010 inductrix clone data captures

Still wont bind,the E010 just flashes.
Any ideas?

Please Log in or Create an account to join the conversation.

goebish
Offline
I Void Warranties

09 Sep 2016 18:07 #53693 by goebish

Replied by goebish on topic Eachine E010 inductrix clone data captures

try a lower rf output power

Please Log in or Create an account to join the conversation.

Stecozz
Offline

09 Sep 2016 18:38 #53694 by Stecozz

Replied by Stecozz on topic Eachine E010 inductrix clone data captures

How do I do that?
It won't let me change the tx powe in the menu,is that what you mean?
Cheers

Please Log in or Create an account to join the conversation.

goebish
Offline
I Void Warranties

09 Sep 2016 18:40 #53695 by goebish

Replied by goebish on topic Eachine E010 inductrix clone data captures

uncomment
has_pa-nrf24l01 = 1
in hardware.ini

Please Log in or Create an account to join the conversation.

Alias_Hendrik
Offline

09 Sep 2016 19:08 #53696 by Alias_Hendrik

Replied by Alias_Hendrik on topic Eachine E010 inductrix clone data captures

I have the E010 working with my Devo 7E so thanks to all involved. I just need to figure out why headless is sometimes not working when i push the LH+ trim button on my 7E and how to bring down the hover point in the throttle stick range because it's out of my comfort? zone but it's a long time ago i played with ini's lol.
With the right stick (stock tx) to the lower left, the E010 resets and set also the headless direction. With both sticks to the lower right, the stock tx will give a beep but does anyone knows what that means or what it should do? Perhaps something shows up in the captures.

Anyway a really big thank you guys for all the work. I already ordered 3 more

Please Log in or Create an account to join the conversation.

Stecozz
Offline

09 Sep 2016 19:10 #53697 by Stecozz

Replied by Stecozz on topic Eachine E010 inductrix clone data captures

goebish wrote: uncomment
has_pa-nrf24l01 = 1
in hardware.ini

Yes it is but still can't bind.
Funny how it's ok with the h8?

Please Log in or Create an account to join the conversation.

vent357
Offline

10 Sep 2016 01:02 #53705 by vent357

Replied by vent357 on topic Eachine E010 inductrix clone data captures

I bought a Devo 7E and did the 3 in 1 mod using ( www.amazon.com/gp/product/B01FX73J3Y/ref...3_s00?ie=UTF8&psc=1 )
Updated the firmware to (deviation-devo7e-v5.0.0-28fd02d.zip) but cant get a sub menu in the MJXq file its listed as *MJXq ? any help would be greatly appreciated

Please Log in or Create an account to join the conversation.

goebish
Offline
I Void Warranties

10 Sep 2016 07:56 #53708 by goebish

Replied by goebish on topic Eachine E010 inductrix clone data captures

That means the nrf24l01 is not properly installed or configured.

Please Log in or Create an account to join the conversation.

Stecozz
Offline

10 Sep 2016 08:38 #53709 by Stecozz

Replied by Stecozz on topic Eachine E010 inductrix clone data captures

could someone check these for me please.
as i still cant bind.

File Attachment:

File Name: tx.ini
File Size:4 KB

Please Log in or Create an account to join the conversation.

Stecozz
Offline

10 Sep 2016 08:39 #53710 by Stecozz

Replied by Stecozz on topic Eachine E010 inductrix clone data captures

File Attachment:

File Name: hardware.ini
File Size:1 KB

Please Log in or Create an account to join the conversation.

goebish
Offline
I Void Warranties

10 Sep 2016 08:39 #53711 by goebish

Replied by goebish on topic Eachine E010 inductrix clone data captures

This has nothing to do with tx.ini, check in hardware.ini that the correct pin is assigned to select the nrf24l01 module.

Please Log in or Create an account to join the conversation.

goebish
Offline
I Void Warranties

10 Sep 2016 08:46 #53712 by goebish

Replied by goebish on topic Eachine E010 inductrix clone data captures

Hmm looks like a linefeed is missing in your hardware.ini, also post your model.ini file.

Please Log in or Create an account to join the conversation.

Stecozz
Offline

10 Sep 2016 08:51 #53713 by Stecozz

Replied by Stecozz on topic Eachine E010 inductrix clone data captures

File Attachment:

File Name: model33.ini
File Size:4 KB

Please Log in or Create an account to join the conversation.

Stecozz
Offline

10 Sep 2016 08:53 #53714 by Stecozz

Replied by Stecozz on topic Eachine E010 inductrix clone data captures

File Attachment:

File Name: model32.ini
File Size:20 KB

this is the H8 file that binds fine?

Please Log in or Create an account to join the conversation.

Time to create page: 0.083 seconds

Force desktop display

Eachine E010 inductrix clone data captures

File Attachment:

Attachments:

File Attachment:

Attachments:

File Attachment:

Attachments:

File Attachment:

Attachments: