Eachine E010 inductrix clone data captures

goebish wrote:

Alias_Hendrik wrote:

goebish wrote: @Alias_Hendrik, can you check if this build fixes the issue with headless mode please ?
Devo 7e

Installed the build but the E010 refuses to bind. I checked for the correct version on my 7E and it's installed.

I noticed that it wouldn't completely bind with some txid (the protocol is not fully cracked, I'm waiting for more captures ...), try with a different fixed transmitter ID.
Disconnect / reconnect battery on the quad between tries because it get stuck when trying to bind with a non working ID.

I put some random nr's in and it's ok now Headless mode is working correct in this build thanks! The return to home still doesn't respond always. Meaning when i push rth it sometimes does nothing and sometimes i can see it starts the rth but it stops after a second. Pushing the button 4 a 5 times real quick, it reacts on one of these pushes and it's coming back like it should. In the channel monitor the LH push button for CH10 works each time going from -100 to 100.

Ok, I try in english but my english is very bad, yes my 7e is original, Thank you for your patience whit me, I really a Noob now i think i have anderstand.

Still trying haha

Ive wiped the whole drive and replaced it with latest nightly build into my 7e and its now saying "protocol mismatch 0801fc6c and 0801ef18"

what am i doing wrong?

goebish wrote: You've to flash the .dfu and copy the .mod files to the protocol folder.
Your error probably means the dfu doesn't match the .mod files.

Just wish i was clever enough to know how to do that?
All i did was replace the whole lot for the new build

Sorry.
Would love a video of how to do this and and how to update models etc after youve already installed deviation.

i give up for now lol..

yes!!! It's ok my devo7e is ok, I can find the E010 in bind protocol , now i waiting to the tiny for test (back order to BG). Thank very much.

done the dfu and now can enable E010.
Still wont bind though

goebish wrote: Try with a few different transmitter ID.
Disconnect / reconnect the battery on the quad between each try.

Nothing I'm afraid

goebish wrote: I updated the test builds with headless and transmitter ID fix
www.dropbox.com/sh/myda7gwpwfhkbw4/AABZS...QEt7BWI1BWDh7Ja?dl=0

I installed the above version, headless is ok too and can bind with a fixed id and also when fixed id is "none".

Thanks for sorting this guys
My e010 arrived today, I had already flashed and copied the files in prep on my 7E so was immediately able to fly it around the house

I still am unable to get flip, headless or RTH to work
(I did test flip mode on the TX it shipped with, just to make sure it would and would possibly be the only feature I would want to use with it)

I have 2x extra 3 way switches
I did try and setup the fmode switch to output -100 / 100 on ch6 but flipping it or toggling it has not induced a flip yet
I am using deviation-devo7e-v5.0.0-52c55d7 which I believe is the most recent

I did spot an ini further up the thread and tried it out, but for some odd reason the yaw/rudder didn't work on the quad and when I looked into the ch outputs screen the rudder stick seemed to be acting like a switch

Again... you guys rock !

Regards
Rob