Eachine E010 inductrix clone data captures

yeah that will definitely be needed, as a few guys at the club are on their way home to order one right now now after seeing mine fly with my 7e today lol, i'll see if i can borrow/claim their stock tx's to get some more id's for you

goebish wrote: Cool, next step will be to try to crack txid / rf channel relationship, or at least have captures from at least 5-6 transmitters so we can race without interferences

Let's hope it's not as difficult as the DSMX "enigma" haha Good luck and thanks

noob question. will i need a module for this,or can i fly it straight with devation?

There is a specific ID to give ? coz sometimes I can't bind ...it or have slow responses .... but maybe it's coming from nRF24L01..... I will check with another radio

EDIT: it's my NRF24L01 module ... sometimes not working a small short somewhere for this radio

goebish wrote: Can you make a capture of your stock transmitter to help understand txid please ? (just bind sequence)

I will .... Classic XN297 pinout ?

goebish wrote: Ok, looks like it's running at 250kbps instead of 1Mbps

new build:
Devo 7e

crossing fingers

Hi I have installed this build but cannot get it to bind, does anyone have a model set up that I could try?
Thanks Guys and Girls

Yea I worked it out, in the protocol_opts did nto work out had to set Format=E010.

Done that and it has bound.

I had a look at some code of yours at github and worked it.

You are an absolute genius. Can't wait till lunch time and take this for a fly.

Thanks again

parriehunter wrote: You are an absolute genius.

+1

Hey guys, this is working great. I only have one rate at the moment and it feel like it needs to be higher, is there a channel for rates?

goebish wrote: Rate is already set to expert.

I thought that was the case, thanks. I'll just stick to putting silverwared boards in these frames then

Hey guys,I have a devo7e and devo10. I was able to bind in devo7e. However, in devo10 could not be bind.
Do not be bind in devo10?
Thanks!

Yes. I am adding the 3in1 module in my DEVO10. CX10 and V202, MJX protocol is bind without any problems.
Thanks goebish